Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X150-30STC
The AirTAC JSIJ63~80 Adjustable Cylinder JSIJ63X150-30STC is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø63mm bore and 150mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ63 mm
- Stroke150 mm
- Port sizeG3/8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM18×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X150-30STC
The external stop screw lets you shorten the forward travel by up to 30 mm, yielding a usable 120 to 150 mm range while the retract end remains fixed. This allows precise end-position tuning without swapping the actuator. The extruded hard-anodized aluminium barrel omits tie rods, making the body shorter and more compact than a same-bore ISO 15552 unit. It uses a G3/8 port and an M18x1.5 rod thread.
The included -S magnet enables position sensing via CMSE or DMSE switches fitted into the side grooves. Adjustable 29 mm air cushions at both ends manage end-of-stroke deceleration, though the cylinder relies on live air; an external rod lock or pilot-operated check valve is required to hold a load securely during pressure loss.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X150-30STC Technical Specifications
| Model | Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X150-30STC |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 150 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G3/8 |
| Rod thread | M18×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | 1962 N |
| Max (@1.0 MPa) | 286 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X150-30STC
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 63 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X150-30STC Is Used
Transfer Push-off
Shortens the extend stroke by 30 mm to push parts off a conveyor without readjusting the hard stop, accommodating varying product widths on the fly.
Clamp Positioning
Fine-tunes the forward clamping reach within the 120 to 150 mm window, ensuring delicate components are held securely without over-travel.
Pallet Stopper
Uses the TC mount for a pivoting trunnion fit and the external adjuster to dial in the exact stopping point for mixed pallet sizes.
Is the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X150-30STC the Right Cylinder?
The -30 mm adjustable window is particularly useful when sharing a spare cylinder across slightly different stroke variants or fine-tuning the final extended position on the machine. The TC trunnion mount present on this SKU provides a pivoting centerline interface. Because this unit includes the -S magnet, you can directly install CMSE/DMSE sensors. For any stroke length of 300 mm or greater, always guide the load to prevent side-load damage to the rod and front cover.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X150-30STC FAQ
The theoretical maximum force is 318 kgf at 1.0 MPa. This 63 mm bore model uses a G3/8 air port and features a 29 mm adjustable air cushion at both ends.
The nominal stroke is 150 mm, which is the maximum forward travel. An external stop screw allows you to shorten the extend stroke on-site by up to 30 mm, giving a usable range of 120 to 150 mm. The retract end is fixed, and this stop mechanism only sets the end position; it does not lock or hold the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X150-30STC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.