
The AirTAC JSIJ63~80 Adjustable Cylinder JSIJ63X350-75 is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø63mm bore and 350mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
The external stop screw provides a 75 mm adjustment window, letting you tune the usable extend stroke anywhere from 350 mm down to 275 mm without swapping the cylinder. Built with an extruded hard-anodized aluminum barrel, the body is noticeably shorter and more compact than a same-bore ISO 15552 unit.
This double-acting double-rod actuator uses a G3/8 port and an M18x1.5 rod thread. Because this specific SKU lacks the -S magnet, it cannot accept CMSE or DMSE sensors. The 29 mm adjustable air cushions at both ends decelerate the piston near stroke end, but remember this mechanism is not a load lock; you will need an external rod lock or pilot-operated check valve to hold a load securely on air loss.
| Model | Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X350-75 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 350 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G3/8 |
| Rod thread | M18×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | 1962 N |
| Max (@1.0 MPa) | 286 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 63 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Dial in the exact push-off distance on a conveyor diverter by shortening the extend stroke from 350 mm down to 275 mm on-site.
Accommodate varying pallet depths by turning the external stop screw to set the precise end position without changing the actuator.
The 75 mm adjustable window is ideal for sharing a spare cylinder across slightly different stroke variants or fine-tuning the end position on-site. JSIJ mounting options include Basic, FA, LB, TC, TCM1, and TCM2. Because the 350 mm stroke is quite long, always use external guides to prevent rod bending and account for side loads. Note that without the -S option, magnetic sensing is impossible.
Quick checklist
The theoretical maximum force is 318 kgf at 1.0 MPa.
The external adjuster lets you shorten the extend stroke on-site by up to 75 mm. The usable extend range is 275 to 350 mm, with 350 mm being the maximum nominal stroke. The retract end remains fixed.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.