
The AirTAC JSIJ63~80 Adjustable Cylinder JSIJ63X75-30S is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø63mm bore and 75mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
The hard-anodized aluminum extruded body is noticeably shorter than a same-bore ISO 15552 unit, saving valuable machine footprint. Air connects via a G3/8 port, driving the 20 mm rod at speeds of 30-800 mm/s.
The -30 code means an external adjuster can shorten the extend stroke on-site by up to 30 mm, giving a usable extend range of 45-75 mm without swapping the cylinder. The retract end remains fixed, while the adjustable air cushions absorb 29 mm of impact at both ends. Because this is an -S SKU, a built-in piston magnet allows CMSE or DMSE sensors to drop directly into the side grooves for position detection.
| Model | Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X75-30S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 75 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G3/8 |
| Rod thread | M18×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | 1962 N |
| Max (@1.0 MPa) | 286 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 63 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Dial in the exact 45-75 mm extend reach on a machining fixture using the external adjuster, ensuring varying part thicknesses are clamped without reprogramming the machine.
Use the magnetic -S variant with a DMSE sensor to confirm gate position, adjusting the stop point on-site by up to 30 mm to accommodate different package sizes.
When sizing this actuator, stepping down to a 50 mm bore drops the 0.5 MPa push force to 982 N, while stepping up to an 80 mm bore raises it to 2513 N. The 30 mm adjuster window is ideal for fine-tuning the extend end position on-site or standardizing a shared spare across multiple stroke variants. Mounting options include FA, LB, TC, TCM1, and TCM2 brackets. For any stroke length over 300 mm, always use a guide rail to prevent side-load damage. Note that a plain cylinder drifts on air loss; use an external rod lock or pilot-operated check valve for secure load holding.
Quick checklist
This 63 mm bore model uses a G3/8 port.
The nominal 75 mm stroke is the maximum extend length. The external adjuster allows you to shorten the extend stroke on-site by up to 30 mm, providing a usable range of 45-75 mm. The retract end is fixed, and this mechanism sets the end position rather than locking the load.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.