verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC JSI Series · JIS Standard Cylinder

Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X75-50S

The AirTAC JSIJ63~80 Adjustable Cylinder JSIJ63X75-50S is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø63mm bore and 75mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.

  • BoreØ63 mm
  • Stroke75 mm
  • Port sizeG3/8
  • Acting typeDouble acting, double rod, adjustable stroke
  • Rod threadM18×1.5
  • CushionAdjustable, 29 mm
$107.44 $114.94Save 6% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every JSIJ63 stroke, adjustment, mounting and version on one page All JSIJ63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X75-50S

Its external adjuster lets you shorten the extend stroke by up to 50 mm, dropping the usable forward travel from the 75 mm maximum down to 25 mm without swapping the unit. The hard-anodized aluminium barrel keeps the overall build more compact than a same-bore ISO 15552 cylinder, while the G3/8 port and M18x1.5 rod thread match the standard 63 mm architecture.

The integrated -S piston magnet supports CMSE and DMSE sensors that mount directly into the side grooves for precise position detection. Remember that the adjustable stop screw sets the end position but does not lock the load; a plain cylinder drifts on air loss, so fit an external rod lock or pilot-operated check valve if you need to hold a suspended weight.

Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X75-50S Technical Specifications

ModelAirtac JSIJ63~80 Adjustable Cylinder JSIJ63X75-50S
SeriesJSI JIS-standard profile cylinder
Bore sizeØ63 mm
Stroke75 mm
Acting typeDouble acting, double rod, adjustable stroke
Port sizeG3/8
Rod threadM18×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 29 mm
Max standard strokeUp to 1500 mm

Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1402 N1402 N
0.7 MPa1962 N1962 N
Max (@1.0 MPa)286 kgf

JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).

Model Code: Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X75-50S

JSIJJIS-standard profile cylinder (adjustable-stroke type).
63Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125).
×75Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensors.

JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.

Where the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X75-50S Is Used

precision_manufacturing

Clamp Position Trimming

Dial in the exact clamping reach on machining fixtures by shortening the 75 mm extend stroke up to 50 mm, accommodating varying part thicknesses without remounting the actuator.

conveyor_belt

Transfer Stopper Tuning

Adjust the physical stopper height on the fly for mixed-product conveyor lines, using the external screw to set the precise 25 to 75 mm protrusion needed for each box size.

Is the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X75-50S the Right Cylinder?

The 50 mm adjuster window is ideal when you need to fine-tune the extend end position on the machine or standardize a single spare across multiple stroke variants. You can mount it via FA, LB, TC, TCM1, or TCM2 brackets, and the built-in magnet allows direct CMSE/DMSE switches. Because the nominal stroke is 75 mm, side-load guides are not strictly necessary, but always ensure smooth linear motion to prevent uneven seal wear.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT / G / NPT)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Set cushions to minimum, then release gradually.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X75-50S FAQ

The theoretical maximum force is 318 kgf at 1.0 MPa. It features a G3/8 port, an M18x1.5 rod thread, and a 29 mm adjustable air cushion at each end.

The nominal extend stroke is 75 mm, which is the maximum forward travel. The external adjuster lets you shorten that extend stroke on-site by up to 50 mm, giving a usable extend range of 25 to 75 mm. The retract end is fixed, and the adjuster sets the end position but does not function as a load lock.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC JSI Cylinders

Request a Quote for Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X75-50S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for JSIJ63X75-50S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.