Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X225-75S
The AirTAC Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X225-75S is a genuine double acting, adjustable stroke JIS-standard air cylinder with a Ø80mm bore and 225mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ80 mm
- Stroke225 mm
- Port sizeG3/8
- Acting typeDouble acting, adjustable stroke
- Rod threadM22×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X225-75S
Delivering 2513 N of push force at 0.5 MPa, this 80 mm bore JIS profile cylinder brings compact power to demanding setups. The extruded hard-anodized aluminum body is notably shorter than an ISO 15552 cylinder of the same bore, saving machine footprint. It handles about 1508 N of real work safely, which translates to lifting roughly 128 kg vertically with a 2:1 margin.
The external stop screw lets you trim the extend stroke on-site by up to 75 mm, giving a usable range of 150 to 225 mm without swapping the actuator. A built-in magnet (-S) supports CMSE/DMSE sensors in the side grooves for position feedback. Piped via a G3/8 port, the retract end remains fixed while the adjustable air cushions decelerate the load smoothly.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X225-75S Technical Specifications
| Model | Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X225-75S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 225 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G3/8 |
| Rod thread | M22×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X225-75S
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 80 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×225 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X225-75S Is Used
Press Fit Tuning
Dial in the exact 150 to 225 mm insertion depth for bearing presses without machining custom spacers.
Variable Length Divert
Adjust the extend stop on-site to push different carton sizes onto diverter lanes quickly.
Pallet Stop Calibration
Fine-tune the end position to act as a precise physical stop for varying pallet widths.
Is the Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X225-75S the Right Cylinder?
This 80 mm bore sits in the upper-mid range, pushing 2513 N at 0.5 MPa; step down to a 63 mm bore (1559 N) for lighter loads, or up to a 100 mm bore (3927 N) when you need more thrust. The 75 mm adjust window is ideal for sharing one spare cylinder across several stroke variants or fine-tuning the end position during commissioning. Mounting options include FA, LB, TC, TCM1, and TCM2. The -S suffix means a magnet is already fitted for CMSE/DMSE switches. For any stroke over 300 mm, always guide the load to prevent side-load damage.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X225-75S FAQ
At 0.5 MPa it pushes 2513 N and pulls 2268 N. At 0.7 MPa it pushes 3518 N and pulls 3175 N. The theoretical maximum force is 513 kgf at 1.0 MPa. It uses a G3/8 port.
The nominal 225 mm extend stroke is the maximum. An external stop screw lets you shorten the extend stroke on-site by up to 75 mm, yielding a usable range of 150 to 225 mm. The retract end is fixed. This mechanism sets the end position and does not lock the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X225-75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.