This model is discontinued
AirTAC has phased out the MALJ series. You can still order this code here: we ship the direct replacement MBLJ25X100-75S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The MBLJ replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MALJ25 Adjustable Mini Air Cylinder MALJ25X100-75-S
The AirTAC MALJ25 Adjustable Mini Air Cylinder MALJ25X100-75-S is a double-acting aluminum mini cylinder with a rear adjustable-stroke stopper: you can trim up to 75 mm, giving a usable end-position window from 25 to 100 mm. This model is discontinued — the direct replacement is the MBLJ25X100-75-S.
- BoreØ25 mm
- Stroke100 mm
- Adjust window25–100 mm
- Port sizeG1/8
- Rod threadM10×1.25
- StatusDiscontinued → MBLJ25X100-75-S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MALJ25 Adjustable Mini Air Cylinder MALJ25X100-75-S
The AirTAC MALJ25X100-75-S is a discontinued double-acting double-rod mini cylinder. It features a 25mm bore, a 100mm stroke, and a rear adjuster that lets you trim up to 75mm, yielding a usable end-position window of 25-100mm. The direct replacement is the MBLJ25X100-75-S, matching bore, stroke, port, and force.
This -S SKU includes a magnet for CS1-M or DS1-M switches; the MBLJ upgrade shifts to CMSG/DMSG/EMSG sensors. The MALJ uses threaded covers and a fixed rubber bumper, while the MBLJ uses a riveted rolling-packed body. The rear adjuster is a travel stop, not a lock; it sets the end position but will not hold a load without live air.
Airtac MALJ25 Adjustable Mini Air Cylinder MALJ25X100-75-S Technical Specifications
| Model | Airtac MALJ25 Adjustable Mini Air Cylinder MALJ25X100-75-S |
|---|---|
| Series | MALJ adjustable-stroke mini cylinder (discontinued) |
| Replacement | MBLJ25X100-75-S |
| Bore size | Ø25 mm |
| Stroke | 100 mm |
| Adjustable window | 25 – 100 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 300 mm |
The rear adjuster is a travel stop, not a lock — it sets the end position but does not hold the load without live air. No back-cover code and no SDB on adjustable-stroke. The MBLJ25X100-75-S carries the same ratings.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
MALJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod MAL push of the same bore. The MBLJ25X100-75-S matches these values.
Model Code: Airtac MALJ25 Adjustable Mini Air Cylinder MALJ25X100-75-S
| MALJ | Adjustable-stroke aluminum mini cylinder, double acting (discontinued). |
|---|---|
| 25 | Bore size in mm (20/25/32/40). |
| ×100 | Nominal stroke length in mm. |
| -75 | Adjustable amount: trim the end to a 25–100 mm window. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBLJ uses CMSG/DMSG/EMSG). |
Replacement: MALJ → MBLJ. No back-cover (CA/U/CM) and no SDB. Mounting: FA / LB.
Where the Airtac MALJ25 Adjustable Mini Air Cylinder MALJ25X100-75-S Is Used
Dispenser Nozzle Height
Fine-tune the exact dispensing height on a moving carousel, trimming the stroke up to 75mm for precise fluid control.
Small Press Pin Insertion
Adjust the end position to seat small pins without bottoming out, relying on the fixed rubber bumper to soften impact.
Replacing the Airtac MALJ25 Adjustable Mini Air Cylinder MALJ25X100-75-S with MBLJ25X100-75-S
To replace the MALJ25X100-75-S, order the direct replacement MBLJ25X100-75-S. Confirm the 25mm bore, 100mm stroke, 75mm adjust code, G1/8 port, M10x1.25 rod thread, and FA/LB mounting. The -S magnet changes the sensor family from CS1-M/DS1-M to CMSG/DMSG/EMSG. There is no back cover or SDB option. Remember the adjuster is a stop, not a lock.
At 100mm stroke, the rod is highly susceptible to side-load bending; keep the load axial to prevent premature seal failure.
Upgrade checklist
- ✓ Order the MBLJ25X100-75-S (same bore/stroke/adjust)
- ✓ Same 25–100 mm adjustable window
- ✓ Adjuster is a stop, not a lock
- ✓ No back cover / SDB — plan an FA/LB mount
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check The rear adjuster sets the end position — it is not a load lock.
- check No back-cover / SDB on adjustable-stroke — use FA / LB.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the MBLJ25X100-75-S instead of this discontinued model.
Airtac MALJ25 Adjustable Mini Air Cylinder MALJ25X100-75-S FAQ
Yes, the MALJ25X100-75-S is discontinued. The direct replacement is the MBLJ25X100-75-S, which matches the 25mm bore, 100mm stroke, 75mm adjuster, G1/8 port, and FA/LB mounting. The MBLJ upgrades the body to a riveted rolling-packed design and shifts the -S magnet sensors from CS1-M/DS1-M to CMSG/DMSG/EMSG.
The bore is 25mm. At 0.5 MPa it pushes 245N and pulls 206N; at 0.7 MPa it pushes 343N, with a maximum of 50 kgf at 1.0 MPa. The 75mm adjust code lets you trim the 100mm stroke back, giving a usable window of 25-100mm. The adjuster is a travel stop, not a lock, so it will not hold a load without live air.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Direct Upgrade
The MBLJ25X100-75-S replaces this model 1:1.
Fast Dispatch
MBLJ replacements are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBLJ Replacements
Request a Quote (Airtac MALJ25 Adjustable Mini Air Cylinder MALJ25X100-75-S → MBLJ25X100-75-S)
Tell us the quantity and destination — we quote the direct MBLJ25X100-75-S replacement with price, stock and lead time, usually within 7-8 hours.