This model is discontinued
AirTAC has phased out the MALJ series. You can still order this code here: we ship the direct replacement MBLJ32X100-10, with the same bore, stroke, output force, port and mounting, so it fits the same application. The MBLJ replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X100-10
The AirTAC Airtac MALJ32 Adjustable Mini Cylinder MALJ32X100-10 is a double-acting aluminum mini cylinder with a rear adjustable-stroke stopper: you can trim up to 10 mm, giving a usable end-position window from 90 to 100 mm. This model is discontinued — the direct replacement is the MBLJ32X100-10.
- BoreØ32 mm
- Stroke100 mm
- Adjust window90–100 mm
- Port sizeG1/8
- Rod threadM10×1.25
- StatusDiscontinued → MBLJ32X100-10
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X100-10
The AirTAC MALJ32X100-10 is a discontinued double-acting mini cylinder with a 32 mm bore and a 100 mm stroke. It provides a usable stroke window of 90-100 mm via a 10 mm rear adjuster. The direct replacement is the MBLJ32X100-10, matching the bore, stroke, adjust code, and G1/8 port.
This SKU lacks a magnet, so it cannot take a position sensor. The rear adjuster is a travel stop, not a lock; it sets the end position but will not hold a load without live air. It uses a fixed rubber bumper, not an adjustable air cushion. Upgrading to the MBLJ32X100-10 changes the threaded covers to a riveted rolling-packed body.
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X100-10 Technical Specifications
| Model | Airtac MALJ32 Adjustable Mini Cylinder MALJ32X100-10 |
|---|---|
| Series | MALJ adjustable-stroke mini cylinder (discontinued) |
| Replacement | MBLJ32X100-10 |
| Bore size | Ø32 mm |
| Stroke | 100 mm |
| Adjustable window | 90 – 100 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
The rear adjuster is a travel stop, not a lock — it sets the end position but does not hold the load without live air. No back-cover code and no SDB on adjustable-stroke. The MBLJ32X100-10 carries the same ratings.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
MALJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod MAL push of the same bore. The MBLJ32X100-10 matches these values.
Model Code: Airtac MALJ32 Adjustable Mini Cylinder MALJ32X100-10
| MALJ | Adjustable-stroke aluminum mini cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×100 | Nominal stroke length in mm. |
| -10 | Adjustable amount: trim the end to a 90–100 mm window. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBLJ uses CMSG/DMSG/EMSG). |
Replacement: MALJ → MBLJ. No back-cover (CA/U/CM) and no SDB. Mounting: FA / LB.
Where the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X100-10 Is Used
PCB Router Depth Stop
Dial the 90-100 mm window to set a precise Z-axis plunge on a PCB depaneling router, using the 402 N extend force to hold the cutting depth without bottoming out.
Carton Flap Tucking
Trim the 10 mm rear stop to time a packaging line flap tucker perfectly, preventing the 563 N extend force at 0.7 MPa from crushing the corrugated board.
Leather Press Skiving
Fine-tune the end position on a leather skiving press to vary the blade bite, relying on the fixed rubber bumper to soften the impact at the end of every 100 mm stroke.
Replacing the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X100-10 with MBLJ32X100-10
To replace this MALJ32X100-10, order the MBLJ32X100-10. Confirm the 32 mm bore, 100 mm stroke, 10 mm adjust code, G1/8 port, PT thread, and FA/LB mounting (no back cover or SDB allowed). Because this SKU has no -S magnet, it cannot accept a sensor; the MBLJ upgrade uses CMSG/DMSG/EMSG switches if you need sensing. The adjuster is a travel stop, not a lock.
At 100 mm stroke, side-load risk is moderate; keep the load aligned to avoid rod bending.
Upgrade checklist
- ✓ Order the MBLJ32X100-10 (same bore/stroke/adjust)
- ✓ Same 90–100 mm adjustable window
- ✓ Adjuster is a stop, not a lock
- ✓ No back cover / SDB — plan an FA/LB mount
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check The rear adjuster sets the end position — it is not a load lock.
- check No back-cover / SDB on adjustable-stroke — use FA / LB.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the MBLJ32X100-10 instead of this discontinued model.
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X100-10 FAQ
Yes, the MALJ32X100-10 is discontinued. The direct replacement is the MBLJ32X100-10, which matches the 32 mm bore, 100 mm stroke, 10 mm adjust code, and G1/8 port. The MBLJ upgrades the threaded covers to a riveted rolling-packed body.
The 10 mm adjuster is a travel stop that lets you shorten the stroke, creating a usable 90-100 mm window. It does not hold the load without live air.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Direct Upgrade
The MBLJ32X100-10 replaces this model 1:1.
Fast Dispatch
MBLJ replacements are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBLJ Replacements
Request a Quote (Airtac MALJ32 Adjustable Mini Cylinder MALJ32X100-10 → MBLJ32X100-10)
Tell us the quantity and destination — we quote the direct MBLJ32X100-10 replacement with price, stock and lead time, usually within 7-8 hours.