This model is discontinued
AirTAC has phased out the MALJ series. You can still order this code here: we ship the direct replacement MBLJ32X160-50S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The MBLJ replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X160-50-S
The AirTAC Airtac MALJ32 Adjustable Mini Cylinder MALJ32X160-50-S is a double-acting aluminum mini cylinder with a rear adjustable-stroke stopper: you can trim up to 50 mm, giving a usable end-position window from 110 to 160 mm. This model is discontinued — the direct replacement is the MBLJ32X160-50-S.
- BoreØ32 mm
- Stroke160 mm
- Adjust window110–160 mm
- Port sizeG1/8
- Rod threadM10×1.25
- StatusDiscontinued → MBLJ32X160-50-S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X160-50-S
The AirTAC MALJ32X160-50-S is a discontinued double-acting, double-rod adjustable-stroke mini cylinder. It features a 32mm bore, a 160mm stroke, and a 50mm rear adjuster, giving a usable end-position window of 110-160mm. The direct replacement is the MBLJ32X160-50-S, matching bore, stroke, force, and port.
The rear adjuster is a travel stop, not a lock; it cannot hold a load without live air. This MALJ has threaded covers and a fixed rubber bumper, while the MBLJ upgrade uses a riveted rolling-packed body. The -S magnet on this unit works with CS1-M/DS1-M switches, whereas the MBLJ uses CMSG/DMSG/EMSG sensors. Mounting is FA or LB only, as there is no back cover or SDB option.
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X160-50-S Technical Specifications
| Model | Airtac MALJ32 Adjustable Mini Cylinder MALJ32X160-50-S |
|---|---|
| Series | MALJ adjustable-stroke mini cylinder (discontinued) |
| Replacement | MBLJ32X160-50-S |
| Bore size | Ø32 mm |
| Stroke | 160 mm |
| Adjustable window | 110 – 160 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
The rear adjuster is a travel stop, not a lock — it sets the end position but does not hold the load without live air. No back-cover code and no SDB on adjustable-stroke. The MBLJ32X160-50-S carries the same ratings.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
MALJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod MAL push of the same bore. The MBLJ32X160-50-S matches these values.
Model Code: Airtac MALJ32 Adjustable Mini Cylinder MALJ32X160-50-S
| MALJ | Adjustable-stroke aluminum mini cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×160 | Nominal stroke length in mm. |
| -50 | Adjustable amount: trim the end to a 110–160 mm window. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBLJ uses CMSG/DMSG/EMSG). |
Replacement: MALJ → MBLJ. No back-cover (CA/U/CM) and no SDB. Mounting: FA / LB.
Where the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X160-50-S Is Used
Connector Insertion Press
Fine-tune the insertion depth of pin headers into molded plastic connectors without adding external spacers, relying on the 50mm rear stopper.
Tube Bending Stop
Use the adjustable end position as a depth stop for a tube bending mandrel, ensuring consistent bend lengths across batches of stainless tubing.
Replacing the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X160-50-S with MBLJ32X160-50-S
To replace the MALJ32X160-50-S, order the MBLJ32X160-50-S. Confirm the 32mm bore, 160mm stroke, 50mm adjust code, G1/8 port, PT thread, and FA/LB mounting. The -S magnet requires upgrading your switches from CS1-M/DS1-M to CMSG/DMSG/EMSG. Remember the adjuster is a stop, not a lock.
Upgrade checklist
- ✓ Order the MBLJ32X160-50-S (same bore/stroke/adjust)
- ✓ Same 110–160 mm adjustable window
- ✓ Adjuster is a stop, not a lock
- ✓ No back cover / SDB — plan an FA/LB mount
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check The rear adjuster sets the end position — it is not a load lock.
- check No back-cover / SDB on adjustable-stroke — use FA / LB.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the MBLJ32X160-50-S instead of this discontinued model.
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X160-50-S FAQ
Yes, the MALJ32X160-50-S is discontinued. The direct replacement is the MBLJ32X160-50-S, which matches the 32mm bore, 160mm stroke, 50mm adjust code, and G1/8 port. You must upgrade your sensors from CS1-M/DS1-M to CMSG/DMSG/EMSG.
The usable stroke window is 110-160mm due to the 50mm rear adjuster. The adjuster is a travel stop, not a lock, and the cylinder uses a fixed rubber bumper.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Direct Upgrade
The MBLJ32X160-50-S replaces this model 1:1.
Fast Dispatch
MBLJ replacements are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBLJ Replacements
Request a Quote (Airtac MALJ32 Adjustable Mini Cylinder MALJ32X160-50-S → MBLJ32X160-50-S)
Tell us the quantity and destination — we quote the direct MBLJ32X160-50-S replacement with price, stock and lead time, usually within 7-8 hours.