This model is discontinued
AirTAC has phased out the MALJ series. You can still order this code here: we ship the direct replacement MBLJ32X200-100S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The MBLJ replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X200-100-S
The AirTAC Airtac MALJ32 Adjustable Mini Cylinder MALJ32X200-100-S is a double-acting aluminum mini cylinder with a rear adjustable-stroke stopper: you can trim up to 100 mm, giving a usable end-position window from 100 to 200 mm. This model is discontinued — the direct replacement is the MBLJ32X200-100-S.
- BoreØ32 mm
- Stroke200 mm
- Adjust window100–200 mm
- Port sizeG1/8
- Rod threadM10×1.25
- StatusDiscontinued → MBLJ32X200-100-S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X200-100-S
The AirTAC MALJ32X200-100-S is a discontinued double-acting double-rod cylinder with a rear adjustable stopper. It trims up to 100 mm at the rear, giving a usable reach window of 100-200 mm. The direct replacement is the MBLJ32X200-100-S, matching bore, stroke, port, and force.
This -S SKU includes a magnet for CS1-M or DS1-M switches; the MBLJ upgrade shifts to CMSG/DMSG/EMSG sensors. The MALJ uses threaded covers, while the MBLJ features a riveted rolling-packed body. A fixed rubber bumper softens end impact, but the adjuster is a travel stop, not a lock, and will not hold a load without live air.
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X200-100-S Technical Specifications
| Model | Airtac MALJ32 Adjustable Mini Cylinder MALJ32X200-100-S |
|---|---|
| Series | MALJ adjustable-stroke mini cylinder (discontinued) |
| Replacement | MBLJ32X200-100-S |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Adjustable window | 100 – 200 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
The rear adjuster is a travel stop, not a lock — it sets the end position but does not hold the load without live air. No back-cover code and no SDB on adjustable-stroke. The MBLJ32X200-100-S carries the same ratings.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
MALJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod MAL push of the same bore. The MBLJ32X200-100-S matches these values.
Model Code: Airtac MALJ32 Adjustable Mini Cylinder MALJ32X200-100-S
| MALJ | Adjustable-stroke aluminum mini cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×200 | Nominal stroke length in mm. |
| -100 | Adjustable amount: trim the end to a 100–200 mm window. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBLJ uses CMSG/DMSG/EMSG). |
Replacement: MALJ → MBLJ. No back-cover (CA/U/CM) and no SDB. Mounting: FA / LB.
Where the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X200-100-S Is Used
Carton Flap Tucking
Adjust the end position on the fly for varying case sizes, tucking flaps at a 180 mm window while the fixed rubber bumper absorbs the repeated impact of high-speed packaging lines.
Bending Press Back-gauge
Use the 100 mm trim window to fine-tune the back-gauge stop on a light manual press, relying on the 346 N pull force to retract the gauge out of the way for the next part.
Replacing the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X200-100-S with MBLJ32X200-100-S
To replace this MALJ32X200-100-S, order the direct replacement MBLJ32X200-100-S. Confirm the 32 mm bore, 200 mm stroke, 100 mm adjust code, PT G1/8 port, and M10x1.25 rod thread. Mounting is FA or LB only, as there is no back cover or SDB option. The -S magnet changes sensor families from CS1-M/DS1-M to CMSG/DMSG/EMSG. Remember the adjuster sets end position but does not lock the load. At 200 mm stroke, guard against rod side-load to prevent seal wear.
Upgrade checklist
- ✓ Order the MBLJ32X200-100-S (same bore/stroke/adjust)
- ✓ Same 100–200 mm adjustable window
- ✓ Adjuster is a stop, not a lock
- ✓ No back cover / SDB — plan an FA/LB mount
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check The rear adjuster sets the end position — it is not a load lock.
- check No back-cover / SDB on adjustable-stroke — use FA / LB.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the MBLJ32X200-100-S instead of this discontinued model.
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X200-100-S FAQ
Yes, the MALJ32X200-100-S is discontinued. The direct replacement is the MBLJ32X200-100-S, matching the 32 mm bore, 200 mm stroke, 100 mm adjust code, and G1/8 port. The MBLJ upgrades the body to a riveted rolling-packed design and changes the magnet switches from CS1-M/DS1-M to CMSG/DMSG/EMSG.
The 100 mm adjuster lets you trim the rear travel stop, creating a usable stroke window from 100 mm up to 200 mm. The adjuster is a travel stop, not a lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Direct Upgrade
The MBLJ32X200-100-S replaces this model 1:1.
Fast Dispatch
MBLJ replacements are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBLJ Replacements
Request a Quote (Airtac MALJ32 Adjustable Mini Cylinder MALJ32X200-100-S → MBLJ32X200-100-S)
Tell us the quantity and destination — we quote the direct MBLJ32X200-100-S replacement with price, stock and lead time, usually within 7-8 hours.