This model is discontinued
AirTAC has phased out the MALJ series. You can still order this code here: we ship the direct replacement MBLJ32X200-40, with the same bore, stroke, output force, port and mounting, so it fits the same application. The MBLJ replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X200-40
The AirTAC Airtac MALJ32 Adjustable Mini Cylinder MALJ32X200-40 is a double-acting aluminum mini cylinder with a rear adjustable-stroke stopper: you can trim up to 40 mm, giving a usable end-position window from 160 to 200 mm. This model is discontinued — the direct replacement is the MBLJ32X200-40.
- BoreØ32 mm
- Stroke200 mm
- Adjust window160–200 mm
- Port sizeG1/8
- Rod threadM10×1.25
- StatusDiscontinued → MBLJ32X200-40
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X200-40
The AirTAC MALJ32X200-40 is a discontinued double-acting double-rod cylinder with a 32 mm bore and 200 mm stroke. The rear screw stopper lets you trim up to 40 mm, yielding a usable extension window of 160-200 mm. The direct replacement is the MBLJ32X200-40, matching the bore, stroke, adjust code, port and force.
This SKU has no -S magnet and cannot take a position sensor. The adjuster sets the end position but is a travel stop, not a lock, so it will not hold a load without live air. Impact is softened by a fixed rubber bumper, not an adjustable air cushion. The original MALJ uses threaded covers and CS1-M/DS1-M sensors, while the MBLJ upgrade features a riveted rolling-packed body and CMSG/DMSG/EMSG switches.
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X200-40 Technical Specifications
| Model | Airtac MALJ32 Adjustable Mini Cylinder MALJ32X200-40 |
|---|---|
| Series | MALJ adjustable-stroke mini cylinder (discontinued) |
| Replacement | MBLJ32X200-40 |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Adjustable window | 160 – 200 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
The rear adjuster is a travel stop, not a lock — it sets the end position but does not hold the load without live air. No back-cover code and no SDB on adjustable-stroke. The MBLJ32X200-40 carries the same ratings.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
MALJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod MAL push of the same bore. The MBLJ32X200-40 matches these values.
Model Code: Airtac MALJ32 Adjustable Mini Cylinder MALJ32X200-40
| MALJ | Adjustable-stroke aluminum mini cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×200 | Nominal stroke length in mm. |
| -40 | Adjustable amount: trim the end to a 160–200 mm window. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBLJ uses CMSG/DMSG/EMSG). |
Replacement: MALJ → MBLJ. No back-cover (CA/U/CM) and no SDB. Mounting: FA / LB.
Where the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X200-40 Is Used
Carton Flap Folder
Adjusts the 32 mm bore reach on packaging lines to handle varying box heights, using the fixed rubber bumper to absorb the 563 N impact at 0.7 MPa.
Leather Press Stop
Fine-tunes the upper die descent window for hide thickness, preventing over-compression by setting the travel stop rather than adding mechanical spacers.
Replacing the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X200-40 with MBLJ32X200-40
To replace this MALJ32X200-40 with the MBLJ32X200-40, confirm the 32 mm bore, 200 mm stroke, 40 mm adjust code, G1/8 port, PT thread, and FA/LB mounting (no back cover or SDB). Since this SKU lacks the -S magnet, it cannot support a sensor, unlike the MBLJ which accepts CMSG/DMSG/EMSG switches. The rear adjuster remains a travel stop, not a lock.
For sizing, stepping down to a 25 mm bore drops the 0.5 MPa push force to 245 N, while stepping up to a 40 mm bore increases it to 628 N. At 200 mm stroke, minimize rod side-load to prevent bending, as the 12 mm rod extends significantly.
Upgrade checklist
- ✓ Order the MBLJ32X200-40 (same bore/stroke/adjust)
- ✓ Same 160–200 mm adjustable window
- ✓ Adjuster is a stop, not a lock
- ✓ No back cover / SDB — plan an FA/LB mount
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check The rear adjuster sets the end position — it is not a load lock.
- check No back-cover / SDB on adjustable-stroke — use FA / LB.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the MBLJ32X200-40 instead of this discontinued model.
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X200-40 FAQ
Yes, the MALJ32X200-40 is discontinued. The direct replacement is the MBLJ32X200-40, matching the 32 mm bore, 200 mm stroke, 40 mm adjust code, G1/8 port and mounting. The MBLJ upgrades the threaded covers to a riveted rolling-packed body.
The usable stroke window is 160-200 mm (200 mm stroke minus the 40 mm adjuster). The adjuster is a travel stop, not a lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Direct Upgrade
The MBLJ32X200-40 replaces this model 1:1.
Fast Dispatch
MBLJ replacements are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBLJ Replacements
Request a Quote (Airtac MALJ32 Adjustable Mini Cylinder MALJ32X200-40 → MBLJ32X200-40)
Tell us the quantity and destination — we quote the direct MBLJ32X200-40 replacement with price, stock and lead time, usually within 7-8 hours.