This model is discontinued
AirTAC has phased out the MALJ series. You can still order this code here: we ship the direct replacement MBLJ32X35-10, with the same bore, stroke, output force, port and mounting, so it fits the same application. The MBLJ replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X35-10
The AirTAC Airtac MALJ32 Adjustable Mini Cylinder MALJ32X35-10 is a double-acting aluminum mini cylinder with a rear adjustable-stroke stopper: you can trim up to 10 mm, giving a usable end-position window from 25 to 35 mm. This model is discontinued — the direct replacement is the MBLJ32X35-10.
- BoreØ32 mm
- Stroke35 mm
- Adjust window25–35 mm
- Port sizeG1/8
- Rod threadM10×1.25
- StatusDiscontinued → MBLJ32X35-10
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X35-10
The AirTAC MALJ32X35-10 is a discontinued 32mm bore, double-acting adjustable-stroke mini cylinder. A rear screw lets you trim the end position by up to 10mm, creating a usable stroke window of 25-35mm. The direct replacement is the MBLJ32X35-10, matching the bore, stroke, adjust code, and G1/8 port.
This SKU has no magnet (-S), so it cannot accept a position sensor. The adjuster is a travel stop, not a lock; it sets the end position but will not hold a load without live air. End impact is absorbed by a fixed rubber bumper. The MALJ uses threaded covers and the older CS1-M/DS1-M sensor family, while the MBLJ upgrade features a riveted rolling-packed body and CMSG/DMSG/EMSG switches.
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X35-10 Technical Specifications
| Model | Airtac MALJ32 Adjustable Mini Cylinder MALJ32X35-10 |
|---|---|
| Series | MALJ adjustable-stroke mini cylinder (discontinued) |
| Replacement | MBLJ32X35-10 |
| Bore size | Ø32 mm |
| Stroke | 35 mm |
| Adjustable window | 25 – 35 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
The rear adjuster is a travel stop, not a lock — it sets the end position but does not hold the load without live air. No back-cover code and no SDB on adjustable-stroke. The MBLJ32X35-10 carries the same ratings.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
MALJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod MAL push of the same bore. The MBLJ32X35-10 matches these values.
Model Code: Airtac MALJ32 Adjustable Mini Cylinder MALJ32X35-10
| MALJ | Adjustable-stroke aluminum mini cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×35 | Nominal stroke length in mm. |
| -10 | Adjustable amount: trim the end to a 25–35 mm window. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBLJ uses CMSG/DMSG/EMSG). |
Replacement: MALJ → MBLJ. No back-cover (CA/U/CM) and no SDB. Mounting: FA / LB.
Where the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X35-10 Is Used
PCB Router Z-Axis Stop
Dial the 25-35mm window to set the exact plunge depth of a depaneling router bit.
Dispenser Valve Dosing
Trim the stroke to fine-tune shot size on an epoxy dispensing head. The 10mm rear adjustment lets you alter the dispense volume mechanically without reprogramming the PLC.
Leather Press Crease
Set a precise end position for a heated creasing blade on a leather goods line. The fixed rubber bumper softens the impact at the 35mm mark, protecting the delicate blade tip.
Replacing the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X35-10 with MBLJ32X35-10
To replace this MALJ32X35-10, order the exact direct replacement MBLJ32X35-10. Confirm the 32mm bore, 35mm stroke, 10mm adjust code, G1/8 PT port, and M10x1.25 rod thread. Mounting is Basic, FA, or LB only (no back cover or SDB). Because this SKU lacks the -S magnet, it cannot take a sensor; if you need sensing, step up to an MBLJ32X35-10S and use CMSG/DMSG/EMSG switches. Remember the adjuster is a stop, not a lock.
At 35mm stroke, rod buckling is minimal, but always ensure side loads are kept in check.
Upgrade checklist
- ✓ Order the MBLJ32X35-10 (same bore/stroke/adjust)
- ✓ Same 25–35 mm adjustable window
- ✓ Adjuster is a stop, not a lock
- ✓ No back cover / SDB — plan an FA/LB mount
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check The rear adjuster sets the end position — it is not a load lock.
- check No back-cover / SDB on adjustable-stroke — use FA / LB.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the MBLJ32X35-10 instead of this discontinued model.
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X35-10 FAQ
Yes, the MALJ32X35-10 is discontinued. The direct replacement is the MBLJ32X35-10, which matches the 32mm bore, 35mm stroke, 10mm adjust code, and G1/8 port. The MBLJ upgrades the body to a riveted rolling-packed design, but all force ratings remain the same.
The 10mm adjust code allows you to trim the 35mm stroke down to a 25mm minimum window. The rear adjuster is a travel stop, not a lock; it will not hold a load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Direct Upgrade
The MBLJ32X35-10 replaces this model 1:1.
Fast Dispatch
MBLJ replacements are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBLJ Replacements
Request a Quote (Airtac MALJ32 Adjustable Mini Cylinder MALJ32X35-10 → MBLJ32X35-10)
Tell us the quantity and destination — we quote the direct MBLJ32X35-10 replacement with price, stock and lead time, usually within 7-8 hours.