This model is discontinued
AirTAC has phased out the MALJ series. You can still order this code here: we ship the direct replacement MBLJ32X400-75S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The MBLJ replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X400-75-S
The AirTAC Airtac MALJ32 Adjustable Mini Cylinder MALJ32X400-75-S is a double-acting aluminum mini cylinder with a rear adjustable-stroke stopper: you can trim up to 75 mm, giving a usable end-position window from 325 to 400 mm. This model is discontinued — the direct replacement is the MBLJ32X400-75-S.
- BoreØ32 mm
- Stroke400 mm
- Adjust window325–400 mm
- Port sizeG1/8
- Rod threadM10×1.25
- StatusDiscontinued → MBLJ32X400-75-S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X400-75-S
The AirTAC MALJ32X400-75-S is a discontinued double-acting, double-rod mini cylinder with a 32 mm bore and 400 mm stroke. The -75 code means the rear stopper trims up to 75 mm, giving a usable 325-400 mm end-position window. The direct replacement is the MBLJ32X400-75-S, matching the bore, stroke, adjust code, port, and mounting.
This -S SKU has a magnet for CS1-M / DS1-M switches; the MBLJ replacement moves to CMSG / DMSG / EMSG sensors. The MALJ uses threaded covers and a fixed rubber bumper to soften end impact, whereas the MBLJ features a riveted rolling-packed body. Remember the adjuster is a travel stop, not a lock; it sets the end position but cannot hold a load without live air.
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X400-75-S Technical Specifications
| Model | Airtac MALJ32 Adjustable Mini Cylinder MALJ32X400-75-S |
|---|---|
| Series | MALJ adjustable-stroke mini cylinder (discontinued) |
| Replacement | MBLJ32X400-75-S |
| Bore size | Ø32 mm |
| Stroke | 400 mm |
| Adjustable window | 325 – 400 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
The rear adjuster is a travel stop, not a lock — it sets the end position but does not hold the load without live air. No back-cover code and no SDB on adjustable-stroke. The MBLJ32X400-75-S carries the same ratings.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
MALJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod MAL push of the same bore. The MBLJ32X400-75-S matches these values.
Model Code: Airtac MALJ32 Adjustable Mini Cylinder MALJ32X400-75-S
| MALJ | Adjustable-stroke aluminum mini cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×400 | Nominal stroke length in mm. |
| -75 | Adjustable amount: trim the end to a 325–400 mm window. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBLJ uses CMSG/DMSG/EMSG). |
Replacement: MALJ → MBLJ. No back-cover (CA/U/CM) and no SDB. Mounting: FA / LB.
Where the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X400-75-S Is Used
Long-Stroke Part Ejector
Ejects molded parts from a press to 325 mm, leveraging the 400 mm stroke and rear stopper to fine-tune the drop zone.
Packaging Flap Folder
Adjusts the fold position of carton flaps on a packaging line, trimming 75 mm at the rear to match varying box depths.
Replacing the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X400-75-S with MBLJ32X400-75-S
To replace the MALJ32X400-75-S, order the direct replacement MBLJ32X400-75-S. Confirm the 32 mm bore, 400 mm stroke, 75 mm adjust code, G1/8 port, PT threads, and FA/LB mounting (no back cover or SDB). Swap the CS1-M / DS1-M sensors for CMSG / DMSG / EMSG switches. At 400 mm stroke, minimize side-load to prevent rod bending. The adjuster is a stop, not a lock.
Upgrade checklist
- ✓ Order the MBLJ32X400-75-S (same bore/stroke/adjust)
- ✓ Same 325–400 mm adjustable window
- ✓ Adjuster is a stop, not a lock
- ✓ No back cover / SDB — plan an FA/LB mount
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check The rear adjuster sets the end position — it is not a load lock.
- check No back-cover / SDB on adjustable-stroke — use FA / LB.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the MBLJ32X400-75-S instead of this discontinued model.
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X400-75-S FAQ
Yes, the MALJ32X400-75-S is discontinued. The direct replacement is the MBLJ32X400-75-S, which matches the 32 mm bore, 400 mm stroke, 75 mm adjust code, and G1/8 port. The MBLJ upgrades the body to a riveted rolling-packed design and changes the magnet switches from CS1-M / DS1-M to CMSG / DMSG / EMSG.
The -75 adjust code lets you trim up to 75 mm at the rear, creating a usable stroke window of 325-400 mm. The adjuster is a travel stop, not a lock; it cannot hold a load without live air.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Direct Upgrade
The MBLJ32X400-75-S replaces this model 1:1.
Fast Dispatch
MBLJ replacements are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBLJ Replacements
Request a Quote (Airtac MALJ32 Adjustable Mini Cylinder MALJ32X400-75-S → MBLJ32X400-75-S)
Tell us the quantity and destination — we quote the direct MBLJ32X400-75-S replacement with price, stock and lead time, usually within 7-8 hours.