This model is discontinued
AirTAC has phased out the MALJ series. You can still order this code here: we ship the direct replacement MBLJ32X60-10, with the same bore, stroke, output force, port and mounting, so it fits the same application. The MBLJ replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X60-10
The AirTAC Airtac MALJ32 Adjustable Mini Cylinder MALJ32X60-10 is a double-acting aluminum mini cylinder with a rear adjustable-stroke stopper: you can trim up to 10 mm, giving a usable end-position window from 50 to 60 mm. This model is discontinued — the direct replacement is the MBLJ32X60-10.
- BoreØ32 mm
- Stroke60 mm
- Adjust window50–60 mm
- Port sizeG1/8
- Rod threadM10×1.25
- StatusDiscontinued → MBLJ32X60-10
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X60-10
The AirTAC MALJ32X60-10 is a discontinued double-acting double-rod cylinder with a 10 mm rear travel stop, yielding a usable 50-60 mm end-position window. The direct replacement is the MBLJ32X60-10, matching the 32 mm bore, 60 mm stroke, G1/8 port and 82 kgf max force.
This SKU lacks a magnet and cannot accept a position sensor. The rear adjuster is a travel stop, not a lock; it sets the end position but will not hold a load without live air. Upgrading to the MBLJ replaces the old threaded covers with a riveted rolling-packed body. If you previously used a -S magnet, note the sensor family changes from CS1-M/DS1-M to CMSG/DMSG/EMSG.
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X60-10 Technical Specifications
| Model | Airtac MALJ32 Adjustable Mini Cylinder MALJ32X60-10 |
|---|---|
| Series | MALJ adjustable-stroke mini cylinder (discontinued) |
| Replacement | MBLJ32X60-10 |
| Bore size | Ø32 mm |
| Stroke | 60 mm |
| Adjustable window | 50 – 60 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
The rear adjuster is a travel stop, not a lock — it sets the end position but does not hold the load without live air. No back-cover code and no SDB on adjustable-stroke. The MBLJ32X60-10 carries the same ratings.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
MALJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod MAL push of the same bore. The MBLJ32X60-10 matches these values.
Model Code: Airtac MALJ32 Adjustable Mini Cylinder MALJ32X60-10
| MALJ | Adjustable-stroke aluminum mini cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×60 | Nominal stroke length in mm. |
| -10 | Adjustable amount: trim the end to a 50–60 mm window. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBLJ uses CMSG/DMSG/EMSG). |
Replacement: MALJ → MBLJ. No back-cover (CA/U/CM) and no SDB. Mounting: FA / LB.
Where the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X60-10 Is Used
Carton Flap Folder Timing
Fine-tune the rear stop to synchronize folding arms on a packaging line case erector, trimming 10 mm to perfectly align flaps before tape application.
Aluminum Profile End-Mill Stop
Use the 346 N pull force to retract a clamping jaw on a CNC aluminum profile saw, adjusting the 10 mm stop to clear different extrusion widths without re-zeroing the machine.
Replacing the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X60-10 with MBLJ32X60-10
To replace this MALJ32X60-10, order the MBLJ32X60-10. Confirm the 32 mm bore, 60 mm stroke, 10 mm adjust code, PT G1/8 port, M10x1.25 rod-end thread, and FA/LB mounting (there is no back-cover or SDB option). Remember the fixed rubber bumper softens impact but is not an adjustable air cushion. The adjuster is a stop, not a lock, so fit an external lock for held loads.
Upgrade checklist
- ✓ Order the MBLJ32X60-10 (same bore/stroke/adjust)
- ✓ Same 50–60 mm adjustable window
- ✓ Adjuster is a stop, not a lock
- ✓ No back cover / SDB — plan an FA/LB mount
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check The rear adjuster sets the end position — it is not a load lock.
- check No back-cover / SDB on adjustable-stroke — use FA / LB.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the MBLJ32X60-10 instead of this discontinued model.
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X60-10 FAQ
Yes, the MALJ32X60-10 is discontinued. The direct replacement is the MBLJ32X60-10, which matches the 32 mm bore, 60 mm stroke, 10 mm adjuster, G1/8 port and 82 kgf max force. The MBLJ upgrades the construction to a riveted rolling-packed body from the original threaded covers.
The 10 mm adjuster is a travel stop that lets you shorten the end position, creating a usable 50-60 mm stroke window. It does not hold the load without air pressure and this SKU has no magnet, so it cannot take a sensor.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Direct Upgrade
The MBLJ32X60-10 replaces this model 1:1.
Fast Dispatch
MBLJ replacements are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBLJ Replacements
Request a Quote (Airtac MALJ32 Adjustable Mini Cylinder MALJ32X60-10 → MBLJ32X60-10)
Tell us the quantity and destination — we quote the direct MBLJ32X60-10 replacement with price, stock and lead time, usually within 7-8 hours.