This model is discontinued
AirTAC has phased out the MALJ series. You can still order this code here: we ship the direct replacement MBLJ32X60-30, with the same bore, stroke, output force, port and mounting, so it fits the same application. The MBLJ replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X60-30
The AirTAC Airtac MALJ32 Adjustable Mini Cylinder MALJ32X60-30 is a double-acting aluminum mini cylinder with a rear adjustable-stroke stopper: you can trim up to 30 mm, giving a usable end-position window from 30 to 60 mm. This model is discontinued — the direct replacement is the MBLJ32X60-30.
- BoreØ32 mm
- Stroke60 mm
- Adjust window30–60 mm
- Port sizeG1/8
- Rod threadM10×1.25
- StatusDiscontinued → MBLJ32X60-30
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X60-30
The AirTAC MALJ32X60-30 is a discontinued double-acting double-rod cylinder with a 32 mm bore and 60 mm stroke. It features a rear stopper that trims up to 30 mm, giving a usable end-position window of 30-60 mm. The direct replacement is the MBLJ32X60-30, matching bore, stroke, port, and force.
It has a fixed rubber bumper, not an air cushion. It lacks a magnet (-S), so it cannot take a position sensor. The MALJ uses threaded covers; the MBLJ upgrade uses a riveted rolling-packed body.
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X60-30 Technical Specifications
| Model | Airtac MALJ32 Adjustable Mini Cylinder MALJ32X60-30 |
|---|---|
| Series | MALJ adjustable-stroke mini cylinder (discontinued) |
| Replacement | MBLJ32X60-30 |
| Bore size | Ø32 mm |
| Stroke | 60 mm |
| Adjustable window | 30 – 60 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
The rear adjuster is a travel stop, not a lock — it sets the end position but does not hold the load without live air. No back-cover code and no SDB on adjustable-stroke. The MBLJ32X60-30 carries the same ratings.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
MALJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod MAL push of the same bore. The MBLJ32X60-30 matches these values.
Model Code: Airtac MALJ32 Adjustable Mini Cylinder MALJ32X60-30
| MALJ | Adjustable-stroke aluminum mini cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×60 | Nominal stroke length in mm. |
| -30 | Adjustable amount: trim the end to a 30–60 mm window. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBLJ uses CMSG/DMSG/EMSG). |
Replacement: MALJ → MBLJ. No back-cover (CA/U/CM) and no SDB. Mounting: FA / LB.
Where the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X60-30 Is Used
Wire Straightener End Trim
Fine-tune the exit reach on a wire straightening line, adjusting the rear stopper to shear exact lengths while the 346 N pull retracts the blade.
Replacing the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X60-30 with MBLJ32X60-30
Replace this MALJ32X60-30 with the exact direct replacement MBLJ32X60-30. Confirm the 32 mm bore, 60 mm stroke, 30 mm adjust code, G1/8 port, PT threads, and FA/LB mounting (no back cover or SDB). The rear adjuster is a travel stop, not a lock; it cannot hold a load without live air.
This 60 mm stroke is well within the 500 mm max, so rod-bending side-load risks are minimal.
Upgrade checklist
- ✓ Order the MBLJ32X60-30 (same bore/stroke/adjust)
- ✓ Same 30–60 mm adjustable window
- ✓ Adjuster is a stop, not a lock
- ✓ No back cover / SDB — plan an FA/LB mount
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check The rear adjuster sets the end position — it is not a load lock.
- check No back-cover / SDB on adjustable-stroke — use FA / LB.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the MBLJ32X60-30 instead of this discontinued model.
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X60-30 FAQ
Yes, the MALJ32X60-30 is discontinued. The direct replacement is the MBLJ32X60-30, which matches the 32 mm bore, 60 mm stroke, 30 mm adjust code, G1/8 port, and mounting. The MBLJ upgrades the body to a riveted rolling-packed design, but the force and ratings remain the same.
The 60 mm stroke has a 30 mm rear adjuster, yielding a usable stroke window of 30-60 mm. It uses a fixed rubber bumper, not an adjustable cushion.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Direct Upgrade
The MBLJ32X60-30 replaces this model 1:1.
Fast Dispatch
MBLJ replacements are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBLJ Replacements
Request a Quote (Airtac MALJ32 Adjustable Mini Cylinder MALJ32X60-30 → MBLJ32X60-30)
Tell us the quantity and destination — we quote the direct MBLJ32X60-30 replacement with price, stock and lead time, usually within 7-8 hours.