This model is discontinued
AirTAC has phased out the MALJ series. You can still order this code here: we ship the direct replacement MBLJ32X70-10S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The MBLJ replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X70-10S
The AirTAC Airtac MALJ32 Adjustable Mini Cylinder MALJ32X70-10S is a double-acting aluminum mini cylinder with a rear adjustable-stroke stopper: you can trim up to 10 mm, giving a usable end-position window from 60 to 70 mm. This model is discontinued — the direct replacement is the MBLJ32X70-10S.
- BoreØ32 mm
- Stroke70 mm
- Adjust window60–70 mm
- Port sizeG1/8
- Rod threadM10×1.25
- StatusDiscontinued → MBLJ32X70-10S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X70-10S
The AirTAC MALJ32X70-10S is a discontinued 32mm bore adjustable-stroke mini cylinder. It is double-acting with a double rod and a rear stopper that lets you trim the end position by up to 10mm, giving a usable 60-70mm stroke window. The direct replacement is the MBLJ32X70-10S, matching your bore, stroke, port, and mounting.
This -S model has a magnet for CS1-M or DS1-M switches; the MBLJ upgrade moves to CMSG/DMSG/EMSG sensors. The MALJ uses threaded covers, while the MBLJ features a riveted rolling-packed body. The rear adjuster is a travel stop, not a lock, so it sets the end position but will not hold a load without live air. End impact is softened by a fixed rubber bumper, as there is no adjustable air cushion.
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X70-10S Technical Specifications
| Model | Airtac MALJ32 Adjustable Mini Cylinder MALJ32X70-10S |
|---|---|
| Series | MALJ adjustable-stroke mini cylinder (discontinued) |
| Replacement | MBLJ32X70-10S |
| Bore size | Ø32 mm |
| Stroke | 70 mm |
| Adjustable window | 60 – 70 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
The rear adjuster is a travel stop, not a lock — it sets the end position but does not hold the load without live air. No back-cover code and no SDB on adjustable-stroke. The MBLJ32X70-10S carries the same ratings.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
MALJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod MAL push of the same bore. The MBLJ32X70-10S matches these values.
Model Code: Airtac MALJ32 Adjustable Mini Cylinder MALJ32X70-10S
| MALJ | Adjustable-stroke aluminum mini cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×70 | Nominal stroke length in mm. |
| -10 | Adjustable amount: trim the end to a 60–70 mm window. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBLJ uses CMSG/DMSG/EMSG). |
Replacement: MALJ → MBLJ. No back-cover (CA/U/CM) and no SDB. Mounting: FA / LB.
Where the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X70-10S Is Used
Bottle Capper Head
Fine-tune the downward reach on a rotary capping turret by up to 10mm to seat plastic caps perfectly, relying on the fixed rubber bumper to soften the mechanical stop.
Wire Stripping Gate
Adjust the end position to set precise stripping depths on a wire processing line, where the 346N pull force cleanly retracts the blade carriage.
Replacing the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X70-10S with MBLJ32X70-10S
To replace this MALJ32X70-10S, order the MBLJ32X70-10S. Confirm the 32mm bore, 70mm stroke, 10mm adjust code, G1/8 port, and PT thread. Mounting is Basic, FA, or LB only, as there is no back-cover or SDB option. Remember the adjuster is a stop, not a lock.
Upgrade checklist
- ✓ Order the MBLJ32X70-10S (same bore/stroke/adjust)
- ✓ Same 60–70 mm adjustable window
- ✓ Adjuster is a stop, not a lock
- ✓ No back cover / SDB — plan an FA/LB mount
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check The rear adjuster sets the end position — it is not a load lock.
- check No back-cover / SDB on adjustable-stroke — use FA / LB.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the MBLJ32X70-10S instead of this discontinued model.
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X70-10S FAQ
Yes, the MALJ32X70-10S is discontinued. The direct replacement is the MBLJ32X70-10S, which matches the 32mm bore, 70mm stroke, 10mm adjust code, G1/8 port, and mounting. The MBLJ uses a riveted body and CMSG/DMSG/EMSG sensors instead of the older CS1-M/DS1-M switches.
The 10mm adjuster is a travel stop that lets you trim the usable stroke window down to 60mm; it does not hold the load without live air.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Direct Upgrade
The MBLJ32X70-10S replaces this model 1:1.
Fast Dispatch
MBLJ replacements are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBLJ Replacements
Request a Quote (Airtac MALJ32 Adjustable Mini Cylinder MALJ32X70-10S → MBLJ32X70-10S)
Tell us the quantity and destination — we quote the direct MBLJ32X70-10S replacement with price, stock and lead time, usually within 7-8 hours.