This model is discontinued
AirTAC has phased out the MALJ series. You can still order this code here: we ship the direct replacement MBLJ32X75-30-H, with the same bore, stroke, output force, port and mounting, so it fits the same application. The MBLJ replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).

The AirTAC MALJ32 Adjustable Mini Cylinder MALJ32X75-30-H is a double-acting aluminum mini cylinder with a rear adjustable-stroke stopper: you can trim up to 30 mm, giving a usable end-position window from 45 to 75 mm. This model is discontinued — the direct replacement is the MBLJ32X75-30-H.
The AirTAC MALJ32X75-30-H is a discontinued adjustable-stroke mini cylinder. It is double-acting with a double rod and a 32mm bore. The -30 code means you can trim up to 30mm at the rear, yielding a usable window of 45-75mm.
The direct replacement is the MBLJ32X75-30-H. This older MALJ uses threaded covers, while the MBLJ features a riveted rolling-packed body. Because this SKU lacks the -S magnet, it cannot accept a position sensor. The rear adjuster sets the end position but is a travel stop, not a lock; it will not hold a load without live air.
| Model | Airtac MALJ32 Adjustable Mini Cylinder MALJ32X75-30-H |
|---|---|
| Series | MALJ adjustable-stroke mini cylinder (discontinued) |
| Replacement | MBLJ32X75-30-H |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Adjustable window | 45 – 75 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
The rear adjuster is a travel stop, not a lock — it sets the end position but does not hold the load without live air. No back-cover code and no SDB on adjustable-stroke. The MBLJ32X75-30-H carries the same ratings.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
MALJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod MAL push of the same bore. The MBLJ32X75-30-H matches these values.
| MALJ | Adjustable-stroke aluminum mini cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×75 | Nominal stroke length in mm. |
| -30 | Adjustable amount: trim the end to a 45–75 mm window. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBLJ uses CMSG/DMSG/EMSG). |
Replacement: MALJ → MBLJ. No back-cover (CA/U/CM) and no SDB. Mounting: FA / LB.
Fine-tune the end position on a packaging line flap folder. The rear stop lets you adjust the 75mm stroke to perfectly match varying box heights without adding external spacers.
Use the 346N pull force to draw wire through a straightening die. The adjustable window allows precise depth control for different wire gauges without swapping hardware.
To replace the MALJ32X75-30-H, order the MBLJ32X75-30-H. Confirm the 32mm bore, 75mm stroke, 30mm adjust code, G1/8 port, and PT thread. Mounting is FA or LB only; there is no back cover or SDB option. Since this SKU has no -S magnet, it cannot take a sensor; upgrading to an MBLJ with -S moves you from CS1-M/DS1-M to CMSG/DMSG/EMSG switches. The adjuster is a travel stop, not a lock.
At 75mm stroke, side-load risk is low, but always guide the rod to prevent bending.
Upgrade checklist
Yes, the MALJ32X75-30-H is discontinued. The direct replacement is the MBLJ32X75-30-H, which matches the 32mm bore, 75mm stroke, 30mm adjust code, and G1/8 port. The MBLJ upgrade uses a riveted rolling-packed body instead of threaded covers.
The -30 adjust code creates a usable stroke window of 45-75mm. The adjuster is a travel stop, not a lock; it will not hold a load without live air.
Genuine AirTAC parts produced by AirTAC factory.
The MBLJ32X75-30-H replaces this model 1:1.
MBLJ replacements are usually dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Tell us the quantity and destination — we quote the direct MBLJ32X75-30-H replacement with price, availability and lead time, usually within 7 hours.