This model is discontinued
AirTAC has phased out the MALJ series. You can still order this code here: we ship the direct replacement MBLJ32X80-10S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The MBLJ replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X80-10-S
The AirTAC Airtac MALJ32 Adjustable Mini Cylinder MALJ32X80-10-S is a double-acting aluminum mini cylinder with a rear adjustable-stroke stopper: you can trim up to 10 mm, giving a usable end-position window from 70 to 80 mm. This model is discontinued — the direct replacement is the MBLJ32X80-10-S.
- BoreØ32 mm
- Stroke80 mm
- Adjust window70–80 mm
- Port sizeG1/8
- Rod threadM10×1.25
- StatusDiscontinued → MBLJ32X80-10-S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X80-10-S
The AirTAC MALJ32X80-10-S adjustable-stroke mini cylinder is discontinued. The direct replacement is the MBLJ32X80-10-S, matching the 32mm bore, 80mm stroke, 10mm adjust code, G1/8 port and magnet. This double-acting double-rod unit uses a rear stopper screw to trim the end position, giving a usable 70-80mm stroke window.
The -10 adjust code sets the travel end position but is a stop, not a lock; it will not hold a load without live air. The fixed rubber bumper softens end impact, but this is not an adjustable cushion. Upgrading to the MBLJ brings a riveted rolling-packed body instead of these threaded covers, and the -S magnet switches from older CS1-M/DS1-M sensors to CMSG/DMSG/EMSG.
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X80-10-S Technical Specifications
| Model | Airtac MALJ32 Adjustable Mini Cylinder MALJ32X80-10-S |
|---|---|
| Series | MALJ adjustable-stroke mini cylinder (discontinued) |
| Replacement | MBLJ32X80-10-S |
| Bore size | Ø32 mm |
| Stroke | 80 mm |
| Adjustable window | 70 – 80 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
The rear adjuster is a travel stop, not a lock — it sets the end position but does not hold the load without live air. No back-cover code and no SDB on adjustable-stroke. The MBLJ32X80-10-S carries the same ratings.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
MALJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod MAL push of the same bore. The MBLJ32X80-10-S matches these values.
Model Code: Airtac MALJ32 Adjustable Mini Cylinder MALJ32X80-10-S
| MALJ | Adjustable-stroke aluminum mini cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×80 | Nominal stroke length in mm. |
| -10 | Adjustable amount: trim the end to a 70–80 mm window. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBLJ uses CMSG/DMSG/EMSG). |
Replacement: MALJ → MBLJ. No back-cover (CA/U/CM) and no SDB. Mounting: FA / LB.
Where the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X80-10-S Is Used
Bottle Capper Height Trim
Trims the final 10mm of the downstroke on a spindle capper, adjusting the cap seating torque impact without physically shimming the 32mm body.
Label Wipe-Down Roller
Fine-tunes the contact window for a wipe-down roller on a packaging line, letting the 346N pull force smooth labels without crushing the product.
Replacing the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X80-10-S with MBLJ32X80-10-S
To replace this MALJ32X80-10-S, order the MBLJ32X80-10-S. Confirm the 32mm bore, 80mm stroke, 10mm adjust code, G1/8 port, PT thread, and FA/LB mounting (there is no back cover or SDB option). The -S magnet requires CMSG/DMSG/EMSG switches on the new body. The adjuster is a travel stop, not a lock; use an external lock for held loads.
At 80mm stroke, side-load risk is low, but keep the rod-end thread M10x1.25 aligned to avoid bending.
Upgrade checklist
- ✓ Order the MBLJ32X80-10-S (same bore/stroke/adjust)
- ✓ Same 70–80 mm adjustable window
- ✓ Adjuster is a stop, not a lock
- ✓ No back cover / SDB — plan an FA/LB mount
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check The rear adjuster sets the end position — it is not a load lock.
- check No back-cover / SDB on adjustable-stroke — use FA / LB.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the MBLJ32X80-10-S instead of this discontinued model.
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X80-10-S FAQ
Yes, the MALJ32X80-10-S is discontinued. The direct replacement is the MBLJ32X80-10-S, matching the 32mm bore, 80mm stroke, 10mm adjust code, and G1/8 port. The new MBLJ body uses a riveted rolling-packed design instead of threaded covers, and the -S magnet switches from CS1-M/DS1-M to CMSG/DMSG/EMSG sensors.
The -10 adjust code means you can trim up to 10mm at the rear, giving a usable stroke window of 70-80mm. The adjuster is a travel stop, not a lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Direct Upgrade
The MBLJ32X80-10-S replaces this model 1:1.
Fast Dispatch
MBLJ replacements are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBLJ Replacements
Request a Quote (Airtac MALJ32 Adjustable Mini Cylinder MALJ32X80-10-S → MBLJ32X80-10-S)
Tell us the quantity and destination — we quote the direct MBLJ32X80-10-S replacement with price, stock and lead time, usually within 7-8 hours.