Airtac MBL Aluminum Alloy Mini Cylinder MBL32X200SCA
The AirTAC Airtac MBL Aluminum Alloy Mini Cylinder MBL32X200SCA is a genuine double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 200mm stroke, G1/8 air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
- BoreØ32 mm
- Stroke200 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionRubber bumper (MBLC variant: adjustable air cushion)
About the Airtac MBL Aluminum Alloy Mini Cylinder MBL32X200SCA
The AirTAC MBL32X200SCA is a double-acting aluminum mini round cylinder engineered for tight machine spaces. It delivers a robust 402 N push force at 0.5 MPa, making this 200 mm stroke variant well-suited for mid-range actuation tasks. This SKU includes a built-in magnet (-S) for rod position detection, supporting AirTAC CMSG reed and DMSG or EMSG electronic solid-state sensor switches.
Unlike ISO 6432 tie-rod bodies, this unit utilizes a riveted rolling-packed barrel where the covers are crimped directly to the tube, ensuring a lightweight, compact footprint that is not designed to be disassembled. The CA pivot back cover allows the cylinder body to swing freely on a pin, effectively accommodating arcing and angular loads that would otherwise bind a rigidly fixed rear mount. Inside, a heterogeneous two-way piston seal retains grease for extended operational life, while the 12 mm carbon-steel piston rod features 20 µm hard-chrome plating for superior wear and corrosion resistance.
Airtac MBL Aluminum Alloy Mini Cylinder MBL32X200SCA Technical Specifications
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL32X200SCA |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MBL Aluminum Alloy Mini Cylinder MBL32X200SCA
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Where the Airtac MBL Aluminum Alloy Mini Cylinder MBL32X200SCA Is Used
Textile Loom Guide Arm
The 402 N thrust and CA pivot mount perfectly drive an oscillating yarn guide arm on a textile loom, allowing the cylinder body to swing smoothly with the mechanism's arc without binding.
Packaging Flap Folder
Utilizing its 200 mm stroke, the cylinder folds secondary cardboard flaps on a continuous motion cartoner, where the pivot clevis accommodates slight angular misalignment during high-speed closing.
Bottling Line Diverter
With its built-in magnet triggering a DMSG electronic sensor, this unit accurately positions a routing gate on a bottling conveyor, handling the 346 N pull load to retract the diverter arm.
Is the Airtac MBL Aluminum Alloy Mini Cylinder MBL32X200SCA the Right Cylinder?
At 0.5 MPa, this 32 mm bore provides 402 N push and 346 N pull force. If your application requires less force, step down to the 25 mm bore offering 245 N push; if you need heavier thrust, step up to the 40 mm bore delivering 628 N push. The base MBL uses a fixed rubber bumper to soften end-of-stroke impacts—upgrade to the MBLC variant if your cycle speed demands adjustable air cushioning. Because a standard MBL does not hold its load when air pressure is lost or exhausted, you must add an external rod lock or pilot-operated check valve if the mechanism must resist gravity during an air failure.
For a 200 mm stroke, the 12 mm rod has limited side-load tolerance; an unsupported mini rod will bend under lateral stress. The CA clevis back cover on this specific SKU helps mitigate arcing loads by allowing the body to pivot, but for rigid linear guidance over this travel distance, you should pair it with an external guide rail or switch to the MBLD double-rod anti-rotation cylinder. Replacement match: 32 mm bore, 200 mm stroke, G1/8 port, PT thread, CA pivot back cover, built-in magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB / FA / SDB) and back cover (CA pivot / U flat-end).
- check Installation by qualified personnel per AirTAC docs.
Airtac MBL Aluminum Alloy Mini Cylinder MBL32X200SCA FAQ
At 0.5 MPa, this 32 mm bore cylinder provides 402 N push and 346 N pull force. At 0.7 MPa, the push force increases to 563 N. The maximum theoretical force is 82 kgf at 1.0 MPa.
No, the base MBL32X200SCA uses a fixed rubber bumper to absorb end-of-stroke impacts; it does not have an adjustable cushion screw. If your high-speed 200 mm stroke requires adjustable air cushioning, select the MBLC variant instead.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MBL Aluminum Alloy Mini Cylinder MBL32X200SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.