Airtac MBL Aluminum Alloy Mini Cylinder MBL32X230CA
The AirTAC Airtac MBL Aluminum Alloy Mini Cylinder MBL32X230CA is a genuine double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 230mm stroke, G1/8 air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
- BoreØ32 mm
- Stroke230 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionRubber bumper (MBLC variant: adjustable air cushion)
About the Airtac MBL Aluminum Alloy Mini Cylinder MBL32X230CA
The AirTAC MBL32X230CA is a double-acting aluminum mini round cylinder engineered for tight machine spaces where a larger profile body cannot fit. It delivers a push force of 402 N and a pull force of 346 N at 0.5 MPa, making this 230 mm stroke variant well-suited for mid-range linear actuation tasks.
This specific SKU features a CA pivot (clevis) back cover that allows the cylinder body to swing on a pin, safely accommodating arcing or angular loads during movement. Internally, a heterogeneous two-way piston seal retains grease for long service life, while the Ø12 mm carbon steel piston rod is protected by 20 µm hard-chrome plating to resist wear and corrosion. Note that because this configuration lacks the -S suffix, it cannot accept a CMSG, DMSG, or EMSG position sensor.
Airtac MBL Aluminum Alloy Mini Cylinder MBL32X230CA Technical Specifications
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL32X230CA |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø32 mm |
| Stroke | 230 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MBL Aluminum Alloy Mini Cylinder MBL32X230CA
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 32 | Bore size in mm. |
| ×230 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Where the Airtac MBL Aluminum Alloy Mini Cylinder MBL32X230CA Is Used
Pallet Diversion Arm
Swings a 230 mm arm to divert small product flow between conveyor lanes using a steady 402 N of push force at 0.5 MPa.
PCB Router Clamp
Pivots to secure printed circuit board panels during routing, utilizing the CA clevis to absorb the angular load of the swing mechanism.
Carton Flap Folder
Extends across a packaging line to fold minor flaps on small cartons, relying on the compact riveted aluminum body to fit within narrow guide rails.
Is the Airtac MBL Aluminum Alloy Mini Cylinder MBL32X230CA the Right Cylinder?
If you need less thrust, stepping down to the 25 mm bore yields 245 N of push force at 0.5 MPa; conversely, stepping up to the 40 mm bore provides 628 N. At 230 mm of travel, the relatively small Ø12 mm rod has a low tolerance for side loads—pair this CA pivot back cover with an external guide or consider the MBLD double-rod type to prevent rod-bearing bending. This SKU uses a G1/8 port with default PT threads, a fixed rubber bumper (upgrade to the MBLC variant if your application requires adjustable air cushioning), and cannot hold a load without live air pressure, so employ an external rod lock if gravity or drift is a concern.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB / FA / SDB) and back cover (CA pivot / U flat-end).
- check Installation by qualified personnel per AirTAC docs.
Airtac MBL Aluminum Alloy Mini Cylinder MBL32X230CA FAQ
At 0.5 MPa, this 32 mm bore cylinder provides 402 N of push force and 346 N of pull force. At 0.7 MPa, the push force increases to 563 N, with a theoretical maximum of 82 kgf at 1.0 MPa. The operational speed ranges from 30-800 mm/s.
The base MBL features a fixed rubber bumper to soften end-of-stroke impact, which is not adjustable; you must step up to the MBLC variant for adjustable air cushioning. Additionally, because this specific SKU lacks the -S magnet suffix, it cannot support CMSG, DMSG, or EMSG electronic position sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MBL Aluminum Alloy Mini Cylinder MBL32X230CA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.