Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X200-10S
The AirTAC Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X200-10S is a genuine double-acting aluminum-barrel mini cylinder with a Ø32mm bore, a 200mm nominal stroke and a rear adjustable-stroke stopper — trim up to 10mm for a usable window of 190–200mm. Adjustable air cushion (both ends).
- BoreØ32 mm
- Stroke200 mm
- Adjustable190–200 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable air cushion (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X200-10S
The AirTAC MBLCJ32X200-10S is a compact double-acting aluminum mini cylinder featuring a rear stroke adjuster and a screw-tunable air cushion at both ends. It delivers 402 N of push force and 346 N of pull force at 0.5 MPa, making it well-suited for moving moderate loads over a 200 mm travel distance. The built-in magnet (-S) enables position detection.
This SKU provides a 10 mm adjustable stroke window, allowing you to fine-tune the end position between 190 and 200 mm. Unlike the standard MBLJ which relies on a fixed rubber bumper, this model features an adjustable air cushion that actively decelerates the piston near the stroke ends to absorb kinetic energy. The riveted aluminum barrel and 20 µm hard-chrome plated carbon-steel rod ensure durability, while the heterogeneous two-way grease-retaining piston seal maintains lubrication over the 30-800 mm/s speed range.
Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X200-10S Technical Specifications
| Model | Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X200-10S |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder (adjustable stroke) |
| Bore size | Ø32 mm |
| Nominal stroke | 200 mm |
| Adjustable window | 190–200 mm (trim 10 mm) |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable air cushion (both ends) |
| Max standard stroke | Up to 500 mm |
The rear stopper sets the end position — it is a travel stop, not a lock. Overall length = A + 2 × stroke + adjustable stroke. MBLJ/MBLCJ mounting is Basic / FA / LB only (no SDB, no back-cover code). Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a margin.
Model Code: Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X200-10S
| MBLCJ | MBLCJ aluminum-barrel adjustable-stroke mini cylinder with adjustable cushion. |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Nominal stroke length in mm. |
| -10 | Adjustable-stroke amount (mm you can trim at the rear). |
| S | Optional built-in magnet for a CMSG/DMSG/EMSG sensor switch. |
Related: MBLJ (adjustable stroke, fixed bumper), MBL (fixed stroke), MBLD (double rod).
Where the Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X200-10S Is Used
Textile Loom Beat-Up
Drives the 200 mm reed mechanism with 402 N of force, using the tunable cushion to soften the end-of-stroke impact and protect the aluminum end covers during high-speed weaving.
Bottling Line Diverter
Adjusts the 10 mm rear stroke window to precisely time a 190 mm gate movement, ensuring glass containers are smoothly guided without harsh mechanical snubbing.
PCB Conveyor Stopper
Acts as a pneumatic stop for populated boards, using the DMSG electronic sensor to confirm rod extension and the adjustable cushion to prevent sudden jarring of delicate solder joints.
Is the Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X200-10S the Right Cylinder?
If you need less force, the 25 mm bore offers 245 N push at 0.5 MPa; if your application requires more power, stepping up to the 40 mm bore yields 628 N push. Choose this MBLCJ over the MBLJ when your cycle speed or moving mass demands tunable pneumatic deceleration rather than a fixed bumper, or over the MBLC if you need to trim the rear travel end. Remember, the rear adjuster is a travel stop and the cushion only decelerates; neither holds the load, so external locking is required for static positioning. Mounting is limited to Basic, FA, or LB styles as there is no back-cover or SDB pivot option. For a direct replacement, match the 32 mm bore, 200 mm stroke, 10 mm adjust code, G1/8 port, PT thread, and the -S magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Adjustable window fits your end position
- ✓ Adjuster is a travel stop, not a lock
- ✓ Magnet (S) for sensors?
- ✓ Side load — add a guide on long strokes
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Set the rear stopper for the end position (a travel stop, not a lock).
- check Avoid side load; add an external guide on long strokes.
- check Mounting: Basic / FA flange / LB foot (no SDB, no back-cover code).
- check Installation by qualified personnel per AirTAC docs.
Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X200-10S FAQ
At 0.5 MPa, this 32 mm bore cylinder provides 402 N of push force and 346 N of pull force. At 0.7 MPa, the push force increases to 563 N. The maximum theoretical force is 82 kgf at 1.0 MPa.
The 10 mm adjustable stroke is a rear mechanical stopper that trims the usable travel window down to 190-200 mm. The adjustable air cushion is a separate screw-tunable valve that controls end-of-stroke deceleration. Neither feature acts as a lock to hold a load in place.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Adjustable-Stroke Cylinders
Request a Quote for Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X200-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.