Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X200-50S
The AirTAC Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X200-50S is a genuine double-acting aluminum-barrel mini cylinder with a Ø32mm bore, a 200mm nominal stroke and a rear adjustable-stroke stopper — trim up to 50mm for a usable window of 150–200mm. Adjustable air cushion (both ends).
- BoreØ32 mm
- Stroke200 mm
- Adjustable150–200 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable air cushion (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X200-50S
The AirTAC MBLCJ32X200-50S is a compact double-acting aluminum mini cylinder featuring a rear stroke adjuster and an adjustable air cushion at both ends. It delivers 402 N of push force and 346 N of pull force at 0.5 MPa, making it well-suited for mid-range positioning tasks. The 50 mm rear adjuster creates a usable stroke window of 150 to 200 mm, allowing you to fine-tune the end position without moving the physical mount. A built-in magnet (-S) enables CMSG reed or DMSG/EMSG solid-state sensors to track rod position.
Unlike the fixed rubber bumper on the base MBLJ, this model uses screw-tunable air cushions to decelerate the rod near each end cover, absorbing kinetic energy from heavier 200 mm moves. The riveted rolling-packed barrel and grease-retaining two-way piston seal lock in lubrication for a long service life, while the Ø12 mm carbon-steel rod features 20 µm hard-chrome plating to resist corrosion and scoring. Remember that the rear stopper sets the travel end but does not hold the load, and the cushion only decelerates; neither acts as a mechanical lock.
Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X200-50S Technical Specifications
| Model | Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X200-50S |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder (adjustable stroke) |
| Bore size | Ø32 mm |
| Nominal stroke | 200 mm |
| Adjustable window | 150–200 mm (trim 50 mm) |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable air cushion (both ends) |
| Max standard stroke | Up to 500 mm |
The rear stopper sets the end position — it is a travel stop, not a lock. Overall length = A + 2 × stroke + adjustable stroke. MBLJ/MBLCJ mounting is Basic / FA / LB only (no SDB, no back-cover code). Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a margin.
Model Code: Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X200-50S
| MBLCJ | MBLCJ aluminum-barrel adjustable-stroke mini cylinder with adjustable cushion. |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Nominal stroke length in mm. |
| -50 | Adjustable-stroke amount (mm you can trim at the rear). |
| S | Optional built-in magnet for a CMSG/DMSG/EMSG sensor switch. |
Related: MBLJ (adjustable stroke, fixed bumper), MBL (fixed stroke), MBLD (double rod).
Where the Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X200-50S Is Used
PCB Router Z-Axis
Governs the plunge depth of a spindle on a printed circuit board routing machine, using the 150-200 mm adjustable window to dial in exact cutting depths while the air cushion prevents hard stops.
Bottle Capper Head
Drives a capping head down onto plastic bottles; the 402 N push force at 0.5 MPa secures caps firmly, and the cushioning decelerates the toolhead to avoid cracking the plastic threads.
Pallet Divert Arm
Actuates a diverting arm on a packaging conveyor, relying on the DMSG electronic sensor to confirm full extension before passing the pallet downstream.
Is the Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X200-50S the Right Cylinder?
If you need less force, stepping down to the 25 mm bore yields 245 N push at 0.5 MPa, whereas moving up to the 40 mm bore provides 628 N. Choose the MBLCJ over the MBLJ when your application generates too much end-of-stroke kinetic energy for a fixed bumper, or pick the MBLC if you require a fixed stroke without the rear adjustment mechanism. Because the 50 mm adjuster extends the overall length (A + 2 x stroke + adjust), ensure your machine envelope accommodates the extra tail length.
When ordering a replacement, verify the 32 mm bore, 200 mm stroke, 50 mm adjust code, G1/8 port, PT thread, and the -S magnet. This cylinder lacks a back-cover option and cannot accept an SDB pivot; mounting is limited to Basic, FA flange, or LB foot. Since the stroke is 200 mm, the 12 mm rod is susceptible to bending under off-center loads—always use an external guide rail to prevent side-load damage.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Adjustable window fits your end position
- ✓ Adjuster is a travel stop, not a lock
- ✓ Magnet (S) for sensors?
- ✓ Side load — add a guide on long strokes
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Set the rear stopper for the end position (a travel stop, not a lock).
- check Avoid side load; add an external guide on long strokes.
- check Mounting: Basic / FA flange / LB foot (no SDB, no back-cover code).
- check Installation by qualified personnel per AirTAC docs.
Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X200-50S FAQ
At 0.5 MPa, this 32 mm bore cylinder generates 402 N of push force and 346 N of pull force. At 0.7 MPa, the push force is 563 N. The maximum theoretical force is 82 kgf at 1.0 MPa.
The 50 mm rear adjuster physically stops the piston early, giving you a usable 150-200 mm travel window, but it does not lock or hold the load. The adjustable air cushion only controls the deceleration rate at the stroke ends to protect the end covers; it also does not act as a brake.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Adjustable-Stroke Cylinders
Request a Quote for Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X200-50S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.