Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X200-75
The AirTAC Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X200-75 is a genuine double-acting aluminum-barrel mini cylinder with a Ø32mm bore, a 200mm nominal stroke and a rear adjustable-stroke stopper — trim up to 75mm for a usable window of 125–200mm. Adjustable air cushion (both ends).
- BoreØ32 mm
- Stroke200 mm
- Adjustable125–200 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable air cushion (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X200-75
The AirTAC MBLCJ32X200-75 is a double-acting, single-rod mini cylinder featuring a rear travel stopper that trims up to 75 mm, yielding a usable stroke window of 125 to 200 mm. It delivers 402 N of push force and 346 N of pull force at 0.5 MPa. Unlike the fixed bumper on an MBLJ, this model uses a screw-tunable adjustable air cushion at both ends to decelerate heavier masses before impact, protecting the end covers.
Built with a riveted aluminum barrel and a Ø12 mm hard-chrome plated carbon-steel rod, it operates at speeds from 30 to 800 mm/s. This specific SKU lacks the -S magnet option, so it cannot accept CMSG, DMSG, or EMSG position sensors. The rear adjuster sets the end position but does not lock the load; external guide mechanisms are required to handle side loads on this 200 mm stroke.
Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X200-75 Technical Specifications
| Model | Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X200-75 |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder (adjustable stroke) |
| Bore size | Ø32 mm |
| Nominal stroke | 200 mm |
| Adjustable window | 125–200 mm (trim 75 mm) |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable air cushion (both ends) |
| Max standard stroke | Up to 500 mm |
The rear stopper sets the end position — it is a travel stop, not a lock. Overall length = A + 2 × stroke + adjustable stroke. MBLJ/MBLCJ mounting is Basic / FA / LB only (no SDB, no back-cover code). Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a margin.
Model Code: Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X200-75
| MBLCJ | MBLCJ aluminum-barrel adjustable-stroke mini cylinder with adjustable cushion. |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Nominal stroke length in mm. |
| -75 | Adjustable-stroke amount (mm you can trim at the rear). |
| S | Optional built-in magnet for a CMSG/DMSG/EMSG sensor switch. |
Related: MBLJ (adjustable stroke, fixed bumper), MBL (fixed stroke), MBLD (double rod).
Where the Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X200-75 Is Used
PCB Router Z-Axis
Lifts and lowers a spindle on a PCB depaneling router, using the 125-200 mm window to set precise cutting depth while the air cushion prevents spindle bounce at high speed.
Textile Tenter Frame
Actuates a fabric guide on a stenter frame, trimming the 75 mm rear stroke to align varying fabric widths without relocating the cylinder's LB foot mounts.
Bottle Sorting Gate
Sorts glass bottles on a packaging line by pushing diverts, relying on the 402 N force and tunable end-cushioning to prevent shattered glass at the stroke ends.
Is the Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X200-75 the Right Cylinder?
With a 402 N push at 0.5 MPa, stepping down to the 25 mm bore drops force to 245 N, while stepping up to the 40 mm bore increases it to 628 N. Choose the MBLCJ over the MBLJ when your moving mass requires tuned deceleration rather than a simple rubber bumper, or over the MBLC when you need to fine-tune the end position within that 125-200 mm window. The rear adjuster is a travel stop, not a lock; the rod drifts without live air, and the cushion only decelerates. Mounting is limited to Basic, FA, or LB; no SDB or back-cover options exist. For a drop-in replacement, match the 32 mm bore, 200 mm stroke, 75 mm adjust code, G1/8 PT port, and confirm no magnet is fitted.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Adjustable window fits your end position
- ✓ Adjuster is a travel stop, not a lock
- ✓ Magnet (S) for sensors?
- ✓ Side load — add a guide on long strokes
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Set the rear stopper for the end position (a travel stop, not a lock).
- check Avoid side load; add an external guide on long strokes.
- check Mounting: Basic / FA flange / LB foot (no SDB, no back-cover code).
- check Installation by qualified personnel per AirTAC docs.
Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X200-75 FAQ
At 0.5 MPa, the push force is 402 N and the pull force is 346 N. At 0.7 MPa, the push force is 563 N. The maximum theoretical force is 82 kgf at 1.0 MPa.
This specific SKU lacks the -S code, so no magnet is fitted and it cannot accept CMSG, DMSG, or EMSG sensors. The rear adjuster is a travel stop that sets the 125-200 mm end position, but it does not lock the load; the rod drifts without air pressure, and the cushion only decelerates.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Adjustable-Stroke Cylinders
Request a Quote for Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X200-75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.