Airtac MBLCJ Adjustable Mini Cylinder MBLCJ63X150-10
The AirTAC Airtac MBLCJ Adjustable Mini Cylinder MBLCJ63X150-10 is a genuine double-acting aluminum-barrel mini cylinder with a Ø63mm bore, a 150mm nominal stroke and a rear adjustable-stroke stopper — trim up to 10mm for a usable window of 140–150mm. Adjustable air cushion (both ends).
- BoreØ63 mm
- Stroke150 mm
- Adjustable140–150 mm
- Port sizeG1/4
- Acting typeDouble acting
- Rod threadM14×1.5
- CushionAdjustable air cushion (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MBLCJ Adjustable Mini Cylinder MBLCJ63X150-10
The AirTAC MBLCJ63X150-10 is a compact double-acting mini cylinder engineered for heavy-duty actuation, delivering 1558 N of push force and 1457 N of pull force at 0.5 MPa. It features a rear travel stopper that trims up to 10 mm of rearward movement, creating a precise 140-150 mm usable stroke window for exact end-positioning. A screw-tunable adjustable air cushion at both ends absorbs kinetic energy to prevent end-cover damage during high-speed strokes, distinct from the fixed bumper found on the MBLJ series.
This model utilizes a robust Ø16 mm carbon-steel rod with 20 um hard-chrome plating housed within a riveted rolling-packed aluminum barrel. Because this specific SKU lacks the -S magnet suffix, it cannot accept CMSG, DMSG, or EMSG position sensors. The rear stopper sets the travel end but does not hold the load; external guide mechanisms are required to manage side loads and prevent rod bending on heavier assemblies.
Airtac MBLCJ Adjustable Mini Cylinder MBLCJ63X150-10 Technical Specifications
| Model | Airtac MBLCJ Adjustable Mini Cylinder MBLCJ63X150-10 |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder (adjustable stroke) |
| Bore size | Ø63 mm |
| Nominal stroke | 150 mm |
| Adjustable window | 140–150 mm (trim 10 mm) |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M14×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable air cushion (both ends) |
| Max standard stroke | Up to 500 mm |
The rear stopper sets the end position — it is a travel stop, not a lock. Overall length = A + 2 × stroke + adjustable stroke. MBLJ/MBLCJ mounting is Basic / FA / LB only (no SDB, no back-cover code). Thread options: PT / G / NPT.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a margin.
Model Code: Airtac MBLCJ Adjustable Mini Cylinder MBLCJ63X150-10
| MBLCJ | MBLCJ aluminum-barrel adjustable-stroke mini cylinder with adjustable cushion. |
|---|---|
| 63 | Bore size in mm. |
| ×150 | Nominal stroke length in mm. |
| -10 | Adjustable-stroke amount (mm you can trim at the rear). |
| S | Optional built-in magnet for a CMSG/DMSG/EMSG sensor switch. |
Related: MBLJ (adjustable stroke, fixed bumper), MBL (fixed stroke), MBLD (double rod).
Where the Airtac MBLCJ Adjustable Mini Cylinder MBLCJ63X150-10 Is Used
Injection Mold Ejection
Provides 1558 N of push force to eject dense plastic parts from mold plates, utilizing the 140-150 mm stroke window to fine-tune the ejection footprint and prevent over-travel.
Stainless Steel Tube Cutting
Drives a heavy-duty cutoff saw at high speed, relying on the adjustable air cushion to decelerate the 318 kgf max impact before it strikes the rear end cover.
Palletizer Stop Gate
Arrests incoming 40x48 inch pallets on a conveyor line, using the 1457 N pull force to retract the gate and the tunable cushioning to absorb the pallet's kinetic energy smoothly.
Is the Airtac MBLCJ Adjustable Mini Cylinder MBLCJ63X150-10 the Right Cylinder?
Stepping down from this 63 mm bore (1558 N push at 0.5 MPa), the 50 mm variant yields 981 N, while no larger bore exists in this mini series. Choose the MBLCJ over the fixed-stroke MBLC when on-the-fly end-position trimming is required, or over the MBLJ when heavy masses demand tunable pneumatic deceleration instead of a fixed rubber bumper. Remember that neither the rear stroke adjuster nor the air cushion acts as a mechanical lock; the rod will drift without sustained air pressure.
Mounting is restricted to Basic, FA flange, or LB foot styles, as the MBLCJ series omits back-cover and SDB pivot options. The overall length extends by the adjustment range (A + 2 x stroke + adjust). For a direct replacement, match the 63 mm bore, 150 mm stroke, 10 mm adjust code, G1/4 port, PT thread, and confirm no magnet is fitted. The grease-retaining two-way piston seal ensures consistent lubrication across the 30-800 mm/s speed range.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Adjustable window fits your end position
- ✓ Adjuster is a travel stop, not a lock
- ✓ Magnet (S) for sensors?
- ✓ Side load — add a guide on long strokes
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Set the rear stopper for the end position (a travel stop, not a lock).
- check Avoid side load; add an external guide on long strokes.
- check Mounting: Basic / FA flange / LB foot (no SDB, no back-cover code).
- check Installation by qualified personnel per AirTAC docs.
Airtac MBLCJ Adjustable Mini Cylinder MBLCJ63X150-10 FAQ
At 0.5 MPa, this 63 mm bore cylinder generates 1558 N of push force and 1457 N of pull force. At 0.7 MPa, the push force reaches 2181 N. The theoretical maximum output is 318 kgf at 1.0 MPa operating pressure.
The rear stopper allows you to trim up to 10 mm off the 150 mm stroke, creating a usable travel window of 140 to 150 mm. This adjuster is a travel stop to set the end position, not a load-holding lock; the separate adjustable air cushion only controls deceleration speed.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Adjustable-Stroke Cylinders
Request a Quote for Airtac MBLCJ Adjustable Mini Cylinder MBLCJ63X150-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.