Airtac MBLCJ Adjustable Mini Cylinder MBLCJ63X160-10S
The AirTAC Airtac MBLCJ Adjustable Mini Cylinder MBLCJ63X160-10S is a genuine double-acting aluminum-barrel mini cylinder with a Ø63mm bore, a 160mm nominal stroke and a rear adjustable-stroke stopper — trim up to 10mm for a usable window of 150–160mm. Adjustable air cushion (both ends).
- BoreØ63 mm
- Stroke160 mm
- Adjustable150–160 mm
- Port sizeG1/4
- Acting typeDouble acting
- Rod threadM14×1.5
- CushionAdjustable air cushion (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MBLCJ Adjustable Mini Cylinder MBLCJ63X160-10S
The AirTAC MBLCJ63X160-10S is a compact double-acting mini cylinder engineered for heavy-duty pneumatics, delivering 1558 N of push force and 1457 N of pull force at 0.5 MPa. It features a rear travel stopper that allows you to trim up to 10 mm of movement, creating a precise usable stroke window of 150 to 160 mm. This is paired with a screw-tunable adjustable air cushion at both ends, allowing you to dial in end-of-stroke deceleration for fast moving loads, which protects the end covers far better than a fixed rubber bumper.
Built with a riveted rolling-packed aluminum barrel and a Ø16 mm carbon-steel rod plated with 20 µm hard chrome, this unit handles operating pressures from 0.15 to 1.0 MPa. The -S code indicates a built-in magnet for position detection, supporting AirTAC CMSG reed switches alongside DMSG and EMSG solid-state electronic sensors. Keep in mind the rear stopper sets the travel end but does not hold the load, and the cushion only decelerates; neither acts as a mechanical lock, so external holding mechanisms are required if power is lost.
Airtac MBLCJ Adjustable Mini Cylinder MBLCJ63X160-10S Technical Specifications
| Model | Airtac MBLCJ Adjustable Mini Cylinder MBLCJ63X160-10S |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder (adjustable stroke) |
| Bore size | Ø63 mm |
| Nominal stroke | 160 mm |
| Adjustable window | 150–160 mm (trim 10 mm) |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M14×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable air cushion (both ends) |
| Max standard stroke | Up to 500 mm |
The rear stopper sets the end position — it is a travel stop, not a lock. Overall length = A + 2 × stroke + adjustable stroke. MBLJ/MBLCJ mounting is Basic / FA / LB only (no SDB, no back-cover code). Thread options: PT / G / NPT.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a margin.
Model Code: Airtac MBLCJ Adjustable Mini Cylinder MBLCJ63X160-10S
| MBLCJ | MBLCJ aluminum-barrel adjustable-stroke mini cylinder with adjustable cushion. |
|---|---|
| 63 | Bore size in mm. |
| ×160 | Nominal stroke length in mm. |
| -10 | Adjustable-stroke amount (mm you can trim at the rear). |
| S | Optional built-in magnet for a CMSG/DMSG/EMSG sensor switch. |
Related: MBLJ (adjustable stroke, fixed bumper), MBL (fixed stroke), MBLD (double rod).
Where the Airtac MBLCJ Adjustable Mini Cylinder MBLCJ63X160-10S Is Used
Injection Mold Ejection
Provides 1558 N of push force to eject dense plastic parts from molding machines, using the 150-160 mm adjustable stroke window to ensure parts clear the tooling without damaging the mold face.
Palletizer Stopper
Halts heavy loaded pallets on a packaging conveyor, relying on the tunable air cushion to decelerate the 318 kgf maximum kinetic impact smoothly without slamming the end covers.
Press Feed Clamping
Secures thick metal sheet stock feeding into a mechanical press, using the 1457 N pull force and the -S magnet with a DMSG electronic sensor to verify clamp engagement before the press cycles.
Is the Airtac MBLCJ Adjustable Mini Cylinder MBLCJ63X160-10S the Right Cylinder?
If you need to step down in force, the 50 mm bore variant offers 981 N of push at 0.5 MPa, whereas stepping up is not an option as 63 mm is the largest available size in this family. Choose this MBLCJ over the MBLJ when your application speed requires tunable pneumatic deceleration rather than a fixed bumper, or over the MBLC if you need the rear travel adjuster to fine-tune the end position. The overall length extends to A + 2 x stroke + adjust, and mounting is strictly limited to Basic, FA flange, or LB foot styles—no SDB pivot or back-cover options exist. For an exact replacement, match the 63 mm bore, 160 mm stroke, 10 mm adjust code, G1/4 port, PT thread, and the -S magnet specification.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Adjustable window fits your end position
- ✓ Adjuster is a travel stop, not a lock
- ✓ Magnet (S) for sensors?
- ✓ Side load — add a guide on long strokes
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Set the rear stopper for the end position (a travel stop, not a lock).
- check Avoid side load; add an external guide on long strokes.
- check Mounting: Basic / FA flange / LB foot (no SDB, no back-cover code).
- check Installation by qualified personnel per AirTAC docs.
Airtac MBLCJ Adjustable Mini Cylinder MBLCJ63X160-10S FAQ
At 0.5 MPa, this 63 mm bore cylinder provides 1558 N of push force and 1457 N of pull force. At 0.7 MPa, the push force increases to 2181 N. The maximum theoretical force is 318 kgf at 1.0 MPa.
The rear adjuster is a mechanical travel stop that trims the usable stroke window down to 150-160 mm, setting the exact end position. The adjustable air cushion is a separate screw-tunable valve that controls pneumatic deceleration near the stroke end. Neither the stopper nor the cushion acts as a lock to hold a load in place.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Adjustable-Stroke Cylinders
Request a Quote for Airtac MBLCJ Adjustable Mini Cylinder MBLCJ63X160-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.