Airtac MDJ Adjustable Cylinder MDJ32X15-10S
The AirTAC Airtac MDJ Adjustable Cylinder MDJ32X15-10S is a genuine MD multi-mount cylinder (adjustable stroke), 32 mm bore. Its compact square body fixes from six directions and mounts side by side to save space. It delivers about 402.1 N of push force at 0.5 MPa. A bumper cushions the impact.
- TypeMulti-mount, adjustable stroke
- SeriesMD (standard)
- Bore32 mm
- Push thrust @0.5 MPa402.1 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port size1/8"
- CushionBumper
- MagnetWith magnet (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MDJ Adjustable Cylinder MDJ32X15-10S
The MDJ multi-mount cylinder is a compact square-body actuator that fixes from six directions (front, back, left, right, top and bottom) and can be mounted side by side with other cylinders to save space. This MDJ32X15-10S is the adjustable-stroke, double-acting version with a 32 mm bore, a 15 mm stroke and a 10 mm adjustable range, well suited to applications where the extension must be trimmed on the machine. At 0.5 MPa the bore delivers a theoretical push thrust of 402.1 N (345.6 N on the pull side), cushioning is by a bumper, and magnetic-switch slots run around the body.
This is a genuine AirTAC part. MDJ sits in the standard MD family, so the rod is free to rotate; if the application demands no rotation, specify the MKJ instead. The trailing S on this SKU means it is supplied with a magnet. Operating pressure is 0.15-1.0 MPa (22-145 psi) on air filtered to 40 um, with a temperature range of -20 to 70 C (0 to 150 C only with the optional high-temperature seal material). Dimensions depend on the stroke, so we confirm them from the datasheet on request.
Airtac MDJ Adjustable Cylinder MDJ32X15-10S Technical Specifications
| Model | Airtac MDJ Adjustable Cylinder MDJ32X15-10S |
|---|---|
| Type | Multi-mount cylinder, adjustable stroke |
| Series | MD (standard) |
| Bore | 32 mm |
| Push thrust @0.5 MPa | 402.1 N |
| Port size | 1/8" (PT thread) |
| Magnet | With magnet (S) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper |
| Mounting | Fix from 6 directions; mountable side by side |
Specifications follow the official AirTAC MD/MK multi-mount data. The front cover and piston are short, so avoid an over-long stroke. An optional high-temperature seal material extends the range to 0 to 150 C. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Select the 32 mm bore when thrust matters most: 402.1 N push and 345.6 N pull at 0.5 MPa, double acting. The MDJ adjustable stroke pairs a 15 mm stroke with a 10 mm adjustable range here. This is the standard MD family, where rod rotation is allowed; choose MKJ when rotation must be prevented. The S suffix means the magnet is fitted, enabling position detection via the body slots. Thread is PT as the default, with G available. Keep the stroke within reason: this short-cover design is not intended for over-long strokes, and allowable side load should be confirmed with us or from the datasheet.
Applications
Pick-and-place vertical press
The downward press stroke of a small pick-and-place head that seats a part into a nest. The 32 mm bore provides 402.1 N push at 0.5 MPa, the adjustable range sets the depth, and the magnet lets the control confirm up and down positions.
Palletizer part-presence push
Squaring cartons or totes against a backstop on a palletizing cell. The square body fixes from any of six directions on the frame and units can sit side by side across the width of the infeed.
Lab device indexing stop
Extending and retracting an indexing stop pin on a laboratory or light-assembly automation fixture. The adjustable stroke dials in the stop height, the bumper absorbs each engagement, and the compact body fits crowded baseplates.
FAQ
What does the S at the end of MDJ32X15-10S indicate, and how do I choose the thread?
The trailing S means this cylinder is supplied with a magnet, which lets magnetic switches read position from the slots around the body; the same model without S has no magnet. For the ports, this 32 mm bore uses 1/8" connections, with PT thread as the default and G available as the alternative suffix.
How do I fix this cylinder in my machine?
The multi-mount square body can be fixed from six directions: front, back, left, right, top and bottom, and cylinders can be mounted side by side to save space. Stroke-specific dimensions and allowable side load are not stated on this page; confirm them from the datasheet or ask us.