Airtac MDJ Adjustable Cylinder MDJ32X50-10S
The AirTAC Airtac MDJ Adjustable Cylinder MDJ32X50-10S is a genuine MD multi-mount cylinder (adjustable stroke), 32 mm bore. Its compact square body fixes from six directions and mounts side by side to save space. It delivers about 402.1 N of push force at 0.5 MPa. A bumper cushions the impact.
- TypeMulti-mount, adjustable stroke
- SeriesMD (standard)
- Bore32 mm
- Push thrust @0.5 MPa402.1 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port size1/8"
- CushionBumper
- MagnetWith magnet (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MDJ Adjustable Cylinder MDJ32X50-10S
The MDJ32X50-10S is a genuine AirTAC adjustable-stroke multi-mount cylinder: a 50 mm base stroke with a 10 mm adjustable range, so you can set the exact working stroke at installation. The compact square body fixes from 6 directions (front, back, left, right, top and bottom) and mounts side by side to save space, with magnetic-switch slots around the body. This bore 32 double acting unit produces about 402.1 N of theoretical push force at 0.5 MPa, and cushioning is a bumper.
This SKU includes the magnet (S suffix), so the piston position can be detected by a suitable switch seated in the body slots - confirm specific sensor part numbers from the catalogue. It is a standard MD family part; if your application must prevent rod rotation, choose the MKJ no-rotating variant instead. Ports are PT thread. We confirm dimensions and sizing from the datasheet on request.
Airtac MDJ Adjustable Cylinder MDJ32X50-10S Technical Specifications
| Model | Airtac MDJ Adjustable Cylinder MDJ32X50-10S |
|---|---|
| Type | Multi-mount cylinder, adjustable stroke |
| Series | MD (standard) |
| Bore | 32 mm |
| Push thrust @0.5 MPa | 402.1 N |
| Port size | 1/8" (PT thread) |
| Magnet | With magnet (S) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper |
| Mounting | Fix from 6 directions; mountable side by side |
Specifications follow the official AirTAC MD/MK multi-mount data. The front cover and piston are short, so avoid an over-long stroke. An optional high-temperature seal material extends the range to 0 to 150 C. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Bore 32 is the largest in this series and gives about 402.1 N push at 0.5 MPa, double acting - pick it when the clamp, stopper or pusher needs serious force from a compact footprint. The MDJ adjustable-stroke design adds a 10, 20 or 30 mm adjustable range over the base stroke, which this model takes as 10 mm. MDJ allows normal rod rotation; for no-rotating duty choose MKJ, and for single acting push/pull or double rod duties the other variants cover those.
Stroke: 50 mm sits inside the 60 mm maximum for bore 32 double acting, but the short cover means an over-long stroke reduces guidance, so keep the stroke realistic. Magnet: this SKU carries the S suffix for switch detection; the non-S version omits it. Thread is PT standard with G available. Side-load figures come from the datasheet - route those questions to us.
Applications
Automated clamping on CNC fixtures
With the magnet on board, reed or Hall switches in the body slots confirm open and closed positions, while the adjustable range trims the clamp stroke of this 402.1 N (at 0.5 MPa) bore 32 cylinder.
Pick-and-place end-of-arm pushing
The 6-direction fixing lets the cylinder be bolted to a gripper arm from any face, and side-by-side mounting keeps the end-of-arm package compact on high-density assembly cells.
Pallet gating on conveyor sections
Used as a gate or stopper at conveyor ends, the bumper cushions the pallet impact and the adjustable stroke sets the exact gate travel; the magnet signals gate position to the PLC.
FAQ
What does the S at the end of MDJ32X50-10S mean?
The trailing S means this cylinder is supplied WITH a magnet in the piston, enabling position detection via switches seated in the magnetic-switch slots around the body. The same model without the S (MDJ32X50-10) has no magnet. Magnet is optional on this series, never standard.
How should I choose between the 10, 20 and 30 mm adjustable ranges?
Pick the adjustable range that covers the variation you need to trim at setup - 10, 20 or 30 mm on top of the 50 mm base stroke. Do not choose an over-long stroke unnecessarily: the short cover of a multi-mount cylinder means longer strokes give less side guidance. Dimensions and side-load capacity are confirmed from the datasheet - ask us.