Airtac MDJ Adjustable Cylinder MDJ32X60-10S
The AirTAC Airtac MDJ Adjustable Cylinder MDJ32X60-10S is a genuine MD multi-mount cylinder (adjustable stroke), 32 mm bore. Its compact square body fixes from six directions and mounts side by side to save space. It delivers about 402.1 N of push force at 0.5 MPa. A bumper cushions the impact.
- TypeMulti-mount, adjustable stroke
- SeriesMD (standard)
- Bore32 mm
- Push thrust @0.5 MPa402.1 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port size1/8"
- CushionBumper
- MagnetWith magnet (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MDJ Adjustable Cylinder MDJ32X60-10S
The MDJ32X60-10S is an AirTAC MDJ adjustable-stroke multi-mount cylinder with a 32 mm bore, a 60 mm base stroke and a 10 mm adjustable range on top. The multi-mount body fixes from 6 directions - front, back, left, right, top and bottom - and mounts side by side to save space, with magnetic-switch slots around the body. This is a double-acting cylinder cushioned by a bumper, and at 0.5 MPa the bore delivers a theoretical push force of 402.1 N, enough for clamping and positioning on sizeable parts. It runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), with a proof pressure of 1.5 MPa (215 psi) and an operating temperature of -20 to 70 C (0 to 150 C only with the optional high-temperature seal material).
This is a genuine AirTAC part in the MD standard series, where rod rotation is not prevented; choose the MK family if your application needs no-rotating. As the S in the code shows, this SKU carries a built-in magnet for magnetic-switch sensing in the body's switch slots. Typical materials include an aluminium-alloy body, covers and piston, a stainless or S45C rod, NBR seals and a TPU bumper, with a sintered NdFeB magnet. We confirm exact dimensions and sizing for your stroke from the datasheet on request.
Airtac MDJ Adjustable Cylinder MDJ32X60-10S Technical Specifications
| Model | Airtac MDJ Adjustable Cylinder MDJ32X60-10S |
|---|---|
| Type | Multi-mount cylinder, adjustable stroke |
| Series | MD (standard) |
| Bore | 32 mm |
| Push thrust @0.5 MPa | 402.1 N |
| Port size | 1/8" (PT thread) |
| Magnet | With magnet (S) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper |
| Mounting | Fix from 6 directions; mountable side by side |
Specifications follow the official AirTAC MD/MK multi-mount data. The front cover and piston are short, so avoid an over-long stroke. An optional high-temperature seal material extends the range to 0 to 150 C. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Pick the bore for thrust: at 0.5 MPa this 32 mm bore gives 402.1 N theoretical push (345.6 N pull), the largest figure in the range. MDJ means double acting with an adjustable stroke: the 60 mm base stroke sits at the maximum listed for a bore 32 double-acting cylinder, so watch the short-cover caution, and the -10 suffix adds a 10 mm range you set on site. The trailing S means a magnet is built in, so magnetic switches can be read in the slots around the body; the plain MDJ32X60-10 is the no-magnet version. If the rod must not rotate, choose MKJ instead. Port is 1/8" with PT thread standard; G thread is available as a suffix. For bore-specific side-load values, route that check to us and we will confirm from the datasheet.
Applications
Robotic gripper on a pick-and-place station
The built-in magnet feeds end-of-stroke signals to the robot controller through the body's switch slots, while 402.1 N push at 0.5 MPa grips heavier picked parts.
Indexing stop on a rotary dial table
Mounted below the dial from the 6-direction body, the cylinder indexes workpieces, and the adjustable range sets the exact dwell position per fixture.
Jig positioning pin in a weld fixture
Side-by-side mounting packs several cylinders into a tight weld jig, and the 10 mm adjustable range lets toolmakers tune pin height without reworking the plate.
FAQ
Does MDJ32X60-10S include a magnet, and why does that matter?
Yes. The trailing S in the code means this cylinder carries a built-in magnet, so magnetic switches can detect piston position in the slots around the multi-mount body. The MDJ32X60-10 without the S has no magnet, which is the only difference between the two SKUs; sensing plans should match the SKU you order.
Can I lengthen the stroke beyond 60 mm, and where do I find dimensions and side-load limits?
The 60 mm base stroke is the maximum listed for a bore 32 double-acting cylinder, so treat any longer request with care, since the short covers limit how far the stroke can safely stretch. The -10 suffix adds a 10 mm adjustable range on top of the base stroke. Exact dimensions and allowable side-load values are stroke- and bore-specific, so confirm them from the datasheet with us.