Airtac MDJ Adjustable Cylinder MDJ6X10-10
The AirTAC Airtac MDJ Adjustable Cylinder MDJ6X10-10 is a genuine MD multi-mount cylinder (adjustable stroke), 6 mm bore. Its compact square body fixes from six directions and mounts side by side to save space. It delivers about 14.1 N of push force at 0.5 MPa. A bumper cushions the impact.
- TypeMulti-mount, adjustable stroke
- SeriesMD (standard)
- Bore6 mm
- Push thrust @0.5 MPa14.1 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port sizeM5x0.8
- CushionBumper
- MagnetWithout magnet
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MDJ Adjustable Cylinder MDJ6X10-10
The MDJ6X10-10 is an adjustable-stroke multi-mount cylinder with a 6 mm bore, a 10 mm base stroke and a 10 mm adjustable range. The compact square body fixes from six directions - front, back, left, right, top and bottom - so units can be mounted side by side in very tight spaces, with magnetic-switch slots around the body and high guide precision. As a double acting cylinder it gives a theoretical push force of 14.1 N at 0.5 MPa, and cushioning is provided by a bumper.
This is a genuine AirTAC part from the MD family, the standard multi-mount series; the MK family is the separate no-rotating version. As the SKU shows, this model is supplied without a magnet, with M5x0.8 PT-threaded ports. It runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi) and from -20 to 70 C, extendable to 150 C only with the optional high-temperature seal material. We confirm exact dimensions and sizing details from the datasheet on request.
Airtac MDJ Adjustable Cylinder MDJ6X10-10 Technical Specifications
| Model | Airtac MDJ Adjustable Cylinder MDJ6X10-10 |
|---|---|
| Type | Multi-mount cylinder, adjustable stroke |
| Series | MD (standard) |
| Bore | 6 mm |
| Push thrust @0.5 MPa | 14.1 N |
| Port size | M5x0.8 (PT thread) |
| Magnet | Without magnet |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper |
| Mounting | Fix from 6 directions; mountable side by side |
Specifications follow the official AirTAC MD/MK multi-mount data. The front cover and piston are short, so avoid an over-long stroke. An optional high-temperature seal material extends the range to 0 to 150 C. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
The 6 mm bore suits light-duty work, delivering a theoretical 14.1 N push at 0.5 MPa on this double acting model; step up a bore size when more force is needed. If the rod must not rotate, choose the MK family instead. This is the adjustable-stroke MDJ version, where the 10 mm adjustable range sits on top of the 10 mm base stroke. Keep strokes as short as the application allows - the short cover design cautions against over-long strokes - and confirm allowable side load and exact dimensions from the datasheet or ask us. Thread options are PT (as on this SKU) or G, and the magnet-fitted version is ordered with an S suffix.
Applications
Jig positioning of small parts
Sets tiny components into a precise location within an assembly jig. The 6-way fixing lets the cylinder be mounted from whichever jig face is available, and the 10 mm adjustable range allows fine repositioning.
Light clamping of delicate components
Applies a gentle hold to electronics, plastics or thin sheet parts where a large clamp would damage the workpiece. The theoretical 14.1 N push at 0.5 MPa suits delicate, low-force clamping jobs.
Miniature ejector in assembly heads
Ejects pins or small finished parts from a nest under a compact assembly head. Several units mount side by side on shared pitch, and bumper cushioning protects the small parts being moved.
FAQ
How much force does the 6 mm bore produce on the MDJ6X10-10?
This double acting cylinder gives a theoretical push force of 14.1 N at 0.5 MPa on the push side; the pull side is lower because the rod reduces the effective area. Operating pressure is 0.15-1.0 MPa (22-145 psi). If the application needs more force, move up to a larger bore rather than over-pressurising this one.
What is the difference between the MDJ and MKJ series?
Both are adjustable-stroke multi-mount cylinders, but MDJ is the standard series, where the rod is free to rotate, while MKJ is the no-rotating series, where a plate and fixed rod stop the rod from turning. Choose MDJ when rotation does not matter and MKJ when the load must stay oriented.