Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD32X160
The AirTAC Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD32X160 is a genuine double acting, double rod + cushion JIS-standard round-body mini air cylinder with a Ø32mm bore and 160mm stroke, 1/4" air ports and a SUS304 stainless-steel barrel for mildly corrosive environments. For the same bore and stroke it is shorter than an ISO 6432 cylinder, saving mounting space.
- BoreØ32 mm
- Stroke160 mm
- Port size1/4"
- Acting typeDouble acting, double rod + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
About the Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD32X160
Twin rods exiting both SUS304 stainless covers give the AirTAC MFCD32X160 equal 345.6 N thrust in both directions at 0.5 MPa, making it a JIS-standard round-body mini cylinder that naturally resists rotation. A needle-set variable air cushion at each end soaks up high-speed end-of-stroke shock for smooth operation across the 160 mm travel. This riveted aluminium construction is shorter than an ISO 6432 cylinder for the same bore and stroke, saving valuable machine space.
With a 32 mm bore and 1/4 inch port, it delivers 483.8 N at 0.7 MPa and a theoretical max of 70.5 kgf at 1.0 MPa in either direction. For practical sizing, expect a safe working load of about 207 N, or a vertical lift of roughly 17.6 kg with a 2:1 margin. Note that this specific SKU lacks the -S magnet, so it cannot accept CMSG, DMSG or EMSG position switches.
Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD32X160 Technical Specifications
| Model | Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD32X160 |
|---|---|
| Series | MFCD JIS mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 160 mm |
| Acting type | Double acting, double rod + cushion |
| Port size | 1/4" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC MF/MFC (JIS-standard) datasheet. Barrel: SUS304 stainless steel; covers: aluminum alloy (round-body, riveted rolling-packed construction). Thread options: PT (blank) / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD32X160
| MFCD | JIS-standard round-body mini cylinder (double-rod, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MF-family variants: MF / MFC (double acting ±cushion), MSF / MTF (single acting push / pull), MFD / MFCD (double rod ±cushion), MFJ / MFCJ (adjustable stroke ±cushion). Back covers CA / U / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD32X160 Is Used
Twin-Tool Stamping
Drives opposing tools with equal 345.6 N force both ways, using the second rod to mount a stopper while the air cushion absorbs high-speed impacts.
Anti-Rotation Diverter
Steers packages at 160 mm stroke without side-play, relying on the dual rods for stability and the SUS304 barrel for washdown resistance.
Vertical Lift Gate
Raises a 17.6 kg gate smoothly using the variable cushion to prevent end-of-stroke slamming, though an external check valve is needed to hold the load.
Is the Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD32X160 the Right Cylinder?
When choosing between bores, the MFCD25 provides 206.1 N at 0.5 MPa while the MFCD40 offers 527.8 N, placing this 32 mm bore right in the sweet spot for moderate loads at 345.6 N. The double-rod layout is ideal for high-speed anti-rotation tasks or mounting twin tools, while the adjustable air cushion handles shock without needing bumpers. Remember the cushion only decelerates near the stroke end and does not lock the load; if you need to hold vertical position on air loss, add an external rod lock or pilot check valve. Mounting options include LB foot, FA flange and TC trunnion, but there is no SDB or back-cover code because rods exit both ends.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD32X160 FAQ
It generates 345.6 N at 0.5 MPa and 483.8 N at 0.7 MPa equally in both directions, with a theoretical max of 70.5 kgf at 1.0 MPa. The air port is 1/4 inch and the male rod thread is M10x1.25.
This SKU lacks the -S magnet, so it cannot take CMSG, DMSG or EMSG switches. The variable air cushion only decelerates the piston near stroke end to reduce shock; it is not a brake or lock, so the piston will drift on air loss.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MFCD Cylinders
Request a Quote for Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD32X160
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.