Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD32X200
The AirTAC Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD32X200 is a genuine double acting, double rod + cushion JIS-standard round-body mini air cylinder with a Ø32mm bore and 200mm stroke, 1/4" air ports and a SUS304 stainless-steel barrel for mildly corrosive environments. For the same bore and stroke it is shorter than an ISO 6432 cylinder, saving mounting space.
- BoreØ32 mm
- Stroke200 mm
- Port size1/4"
- Acting typeDouble acting, double rod + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
About the Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD32X200
Twin rods exit both covers on the AirTAC MFCD32X200, yielding equal 345.6 N force at 0.5 MPa in both directions while steadying the load against rotation. This JIS-standard round-body mini cylinder pairs a SUS304 stainless steel barrel with riveted aluminium covers, giving you a shorter overall mounting length than a comparable ISO 6432 unit while resisting mild washdown corrosion.
A needle-set variable air cushion at each end soaks up high-speed end-of-stroke shock across the 200 mm travel, keeping operations quiet. Because this specific SKU lacks the -S magnet option, it cannot accept CMSG, DMSG, or EMSG position switches; the twin 12 mm rods use an M10x1.25 male thread and a 1/4" port.
Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD32X200 Technical Specifications
| Model | Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD32X200 |
|---|---|
| Series | MFCD JIS mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Acting type | Double acting, double rod + cushion |
| Port size | 1/4" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC MF/MFC (JIS-standard) datasheet. Barrel: SUS304 stainless steel; covers: aluminum alloy (round-body, riveted rolling-packed construction). Thread options: PT (blank) / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD32X200
| MFCD | JIS-standard round-body mini cylinder (double-rod, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MF-family variants: MF / MFC (double acting ±cushion), MSF / MTF (single acting push / pull), MFD / MFCD (double rod ±cushion), MFJ / MFCJ (adjustable stroke ±cushion). Back covers CA / U / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD32X200 Is Used
Vertical Lift Stations
Lifts roughly 17.6 kg loads through 200 mm of travel, using the equal both-ways 345.6 N force to raise and lower smoothly without dropping payload on the return stroke.
Twin-Tool Transfer
Mounts a second gripper on the opposing rod for synchronized part handoff, leaning on the twin 12 mm rods to resist torsional twist during rapid 30-800 mm/s indexing.
High-Speed Diverters
Pushes lightweight cartons across a belt where the needle-set air cushions absorb the end-of-stroke shock, preventing bounce at rapid cycle rates.
Is the Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD32X200 the Right Cylinder?
When sizing between the four bores, the 32 mm version sits neatly in the middle: it delivers 345.6 N at 0.5 MPa, jumping to 483.8 N at 0.7 MPa, which is a notable step up from the 206.1 N of the MFCD25 yet lighter than the 527.8 N MFCD40. For vertical lifting, expect a safe working load of about 207 N (roughly 17.6 kg with a 2:1 margin) each way.
Choose this double-rod, variable-cushion build for high-speed transfer or twin-tool tasks needing anti-rotation stability. Remember that the air cushion only decelerates near the stroke end—it is not a brake; if you need to hold a load on air loss, add an external rod lock or pilot check valve. Mounting options include LB foot, FA flange, or TC trunnion (no SDB), and this non-magnet SKU cannot host a sensor.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD32X200 FAQ
The double-rod design provides equal force both ways using the rod-side area. It generates 345.6 N at 0.5 MPa, 483.8 N at 0.7 MPa, and a theoretical maximum of 70.5 kgf at 1.0 MPa. It uses a 1/4" port and M10x1.25 male rod threads.
No, this specific SKU does not include a magnet, so it cannot accept CMSG, DMSG, or EMSG switches. You would need the -S variant for sensing. The cylinder features a variable air cushion at both ends for deceleration, but this is not a lock; use an external rod lock if you must hold position on air loss.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MFCD Cylinders
Request a Quote for Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD32X200
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.