Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD32X75
The AirTAC Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD32X75 is a genuine double acting, double rod + cushion JIS-standard round-body mini air cylinder with a Ø32mm bore and 75mm stroke, 1/4" air ports and a SUS304 stainless-steel barrel for mildly corrosive environments. For the same bore and stroke it is shorter than an ISO 6432 cylinder, saving mounting space.
- BoreØ32 mm
- Stroke75 mm
- Port size1/4"
- Acting typeDouble acting, double rod + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
About the Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD32X75
Twin rods exiting both SUS304 stainless covers give the AirTAC MFCD32X75 equal 345.6 N force in both directions at 0.5 MPa, while a needle-set variable air cushion at each end soaks up high-speed end-of-stroke shock. This JIS-standard round-body mini uses a riveted rolling-packed construction with aluminium covers, and for the same 32 mm bore and 75 mm stroke it is physically shorter than an ISO 6432 cylinder, saving valuable mounting length.
The second rod steadies the load and resists rotation, letting you mount a stopper or second tool on the back side. With a 1/4" air port and M10x1.25 male rod threads, it delivers a safe working load of about 207 N (roughly 60% of the 0.5 MPa figure), which translates to a vertical lift capacity of about 17.6 kg with a 2:1 safety margin. Note this specific SKU lacks the -S magnet, so it cannot accept CMSG, DMSG or EMSG position switches.
Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD32X75 Technical Specifications
| Model | Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD32X75 |
|---|---|
| Series | MFCD JIS mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting, double rod + cushion |
| Port size | 1/4" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC MF/MFC (JIS-standard) datasheet. Barrel: SUS304 stainless steel; covers: aluminum alloy (round-body, riveted rolling-packed construction). Thread options: PT (blank) / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD32X75
| MFCD | JIS-standard round-body mini cylinder (double-rod, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MF-family variants: MF / MFC (double acting ±cushion), MSF / MTF (single acting push / pull), MFD / MFCD (double rod ±cushion), MFJ / MFCJ (adjustable stroke ±cushion). Back covers CA / U / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD32X75 Is Used
Twin-Tool Stamping
Mounts a primary stamping tool and a secondary alignment pin on opposite rods, using the 345.6 N both-ways force to hit and reset in one smooth high-speed cycle.
Anti-Rotation Diverter
Steadies a heavy diverter arm across a packaging line, relying on the twin rods to cut side-play while the needle air cushion absorbs the 75 mm stroke shock.
Vertical Lift Gate
Raises and lowers a 15 kg access gate at 30-800 mm/s, safely under the 17.6 kg vertical lift margin, with equal push and pull keeping the motion stable.
Is the Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD32X75 the Right Cylinder?
When sizing the MFCD family, compare both directions: the MFCD25 provides 206.1 N at 0.5 MPa, while the MFCD40 offers 527.8 N. This 32 mm bore sits perfectly in the middle at 345.6 N both ways, making it ideal for medium-duty high-speed anti-rotation tasks where twin tools are mounted. Choose LB foot, FA flange or TC trunnion mounts (there is no SDB or back-cover code because a rod exits both ends).
Remember that the variable air cushion only decelerates the piston near the stroke end to reduce shock; it is not a brake. If your application must hold a vertical load during air loss or when a valve is centered, add an external rod lock or a pilot-operated check valve, as the piston will drift. Because this exact model has no -S magnet, you cannot attach magnetic sensors; order an -S variant if you need CMSG, DMSG or EMSG switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD32X75 FAQ
It delivers equal force both ways (rod-side area): 345.6 N at 0.5 MPa, 483.8 N at 0.7 MPa, and a theoretical max of 70.5 kgf at 1.0 MPa. The air port is 1/4" with PT threads standard.
No. The variable air cushion only decelerates near stroke end; it is not a lock, so the piston drifts on air loss (use an external rod lock to hold). Also, this SKU lacks the -S magnet, so it cannot take CMSG, DMSG or EMSG switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MFCD Cylinders
Request a Quote for Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD32X75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.