Airtac MFCJ Adjustable Mini Cylinder MFCJ32X150-100S
The AirTAC Airtac MFCJ Adjustable Mini Cylinder MFCJ32X150-100S is a genuine double acting, adjustable stroke + cushion JIS-standard round-body mini air cylinder with a Ø32mm bore and 150mm stroke, 1/4" air ports and a SUS304 stainless-steel barrel for mildly corrosive environments. For the same bore and stroke it is shorter than an ISO 6432 cylinder, saving mounting space.
- BoreØ32 mm
- Stroke150 mm
- Port size1/4"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MFCJ Adjustable Mini Cylinder MFCJ32X150-100S
Tune both travel and end-of-stroke shock on-site with the AirTAC MFCJ32X150-100S, a JIS-standard round-body mini cylinder. An external adjuster lets you shorten the extend stroke by up to 100 mm, while needle variable air cushions at both ends soak up high-speed impact. The SUS304 stainless barrel and riveted aluminium covers resist mild corrosion and washdown.
Driven by a 12 mm rod through a 1/4" port, this double-acting 32 mm bore generates 402.2 N push and 345.6 N pull at 0.5 MPa. The built-in magnet (-S) supports CMSG, DMSG, and EMSG switches for position sensing. For a safe working load, expect around 241 N, or roughly 20.5 kg of vertical lift with a 2:1 margin.
Airtac MFCJ Adjustable Mini Cylinder MFCJ32X150-100S Technical Specifications
| Model | Airtac MFCJ Adjustable Mini Cylinder MFCJ32X150-100S |
|---|---|
| Series | MFCJ JIS mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 150 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/4" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MF/MFC (JIS-standard) datasheet. Barrel: SUS304 stainless steel; covers: aluminum alloy (round-body, riveted rolling-packed construction). Thread options: PT (blank) / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MFCJ Adjustable Mini Cylinder MFCJ32X150-100S
| MFCJ | JIS-standard round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MF-family variants: MF / MFC (double acting ±cushion), MSF / MTF (single acting push / pull), MFD / MFCD (double rod ±cushion), MFJ / MFCJ (adjustable stroke ±cushion). Back covers CA / U / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MFCJ Adjustable Mini Cylinder MFCJ32X150-100S Is Used
High-Speed Changeover
Dial in the extend stroke by up to 100 mm on packaging lines, using the needle cushions to absorb shock during rapid trial fits and format changes.
Light Machining Clamps
Securely hold workpieces with a 241 N safe working load, fine-tuning the jaw position on-site while preventing end-impact marking.
Vertical Lift Stops
Lift loads up to 20.5 kg with a 2:1 safety margin, adjusting the stopping height precisely without needing to swap out the entire cylinder.
Is the Airtac MFCJ Adjustable Mini Cylinder MFCJ32X150-100S the Right Cylinder?
When sizing this adjustable series, compare the real thrust: the 32 mm bore delivers 402.2 N push at 0.5 MPa, whereas the larger MFCJ40 provides 628.3 N, and the smaller MFCJ25 offers 245.3 N. Choose the 32 mm bore for moderate loads where you need to dial in the extend position within a 50 to 150 mm window during high-speed changeovers.
Mounting options include LB foot, FA flange, and TC trunnion (no SDB or back-cover). Remember that the air cushion only decelerates the piston near the end of stroke; it does not lock or hold the load. If gravity or air loss causes drift, install an external rod lock or pilot check valve. The -S magnet enables electronic or reed sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MFCJ Adjustable Mini Cylinder MFCJ32X150-100S FAQ
This 32 mm bore cylinder features a 1/4" port and a 12 mm rod. It generates a push force of 402.2 N and a pull force of 345.6 N at 0.5 MPa. At 0.7 MPa, push is 563 N and pull is 483.8 N. The theoretical maximum force is 82 kgf at 1.0 MPa.
The -S suffix means a magnet is built-in for CMSG, DMSG, or EMSG switches. The external adjuster only shortens the extend end position; it is not a mid-stroke lock. The variable air cushion decelerates the piston near the ends but cannot hold a load on air loss.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MFCJ Cylinders
Request a Quote for Airtac MFCJ Adjustable Mini Cylinder MFCJ32X150-100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.