Airtac MFCJ Adjustable Mini Cylinder MFCJ32X150-75S
The AirTAC Airtac MFCJ Adjustable Mini Cylinder MFCJ32X150-75S is a genuine double acting, adjustable stroke + cushion JIS-standard round-body mini air cylinder with a Ø32mm bore and 150mm stroke, 1/4" air ports and a SUS304 stainless-steel barrel for mildly corrosive environments. For the same bore and stroke it is shorter than an ISO 6432 cylinder, saving mounting space.
- BoreØ32 mm
- Stroke150 mm
- Port size1/4"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MFCJ Adjustable Mini Cylinder MFCJ32X150-75S
Dial in exact end positions on-site with the AirTAC MFCJ32X150-75S, a JIS-standard round-body mini cylinder featuring a 75 mm adjustable extend window and variable air cushions at both ends. The SUS304 stainless barrel and riveted aluminium covers yield a shorter mounting envelope than an ISO 6432 unit, resisting mild washdown while saving space. Driven by a 12 mm rod and 1/4" port, it delivers 402.2 N push at 0.5 MPa, translating to a safe working load of roughly 241 N or a 20.5 kg vertical lift with a 2:1 margin.
This double-acting design lets you shorten the nominal 150 mm extend stroke down to 75 mm without swapping hardware, while the needle cushions soak up high-speed shock. The built-in -S magnet supports CMSG, DMSG, or EMSG switches for position sensing. Remember that the cushion only decelerates the piston near stroke end; it does not function as a brake, so fit an external rod lock if you must hold a load vertically during air loss.
Airtac MFCJ Adjustable Mini Cylinder MFCJ32X150-75S Technical Specifications
| Model | Airtac MFCJ Adjustable Mini Cylinder MFCJ32X150-75S |
|---|---|
| Series | MFCJ JIS mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 150 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/4" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MF/MFC (JIS-standard) datasheet. Barrel: SUS304 stainless steel; covers: aluminum alloy (round-body, riveted rolling-packed construction). Thread options: PT (blank) / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MFCJ Adjustable Mini Cylinder MFCJ32X150-75S
| MFCJ | JIS-standard round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MF-family variants: MF / MFC (double acting ±cushion), MSF / MTF (single acting push / pull), MFD / MFCD (double rod ±cushion), MFJ / MFCJ (adjustable stroke ±cushion). Back covers CA / U / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MFCJ Adjustable Mini Cylinder MFCJ32X150-75S Is Used
Sorter Diverter Tuning
Fine-tune the 75 to 150 mm extend stroke on a high-speed sorting lane while the needle cushions absorb the impact of rapid package diverting.
Light Press Fit
Dial in the exact insertion depth for a 20 kg sub-assembly, leveraging the 402.2 N push force and smooth deceleration to protect delicate components.
Pallet Stop Adjustment
Adjust the stroke on the fly for varying pallet widths; the SUS304 barrel withstands damp environments while the cushion prevents harsh end impacts.
Is the Airtac MFCJ Adjustable Mini Cylinder MFCJ32X150-75S the Right Cylinder?
Choose the 32 mm bore when 402.2 N push at 0.5 MPa is sufficient, stepping up to the MFCJ40 at 628.3 N if your payload exceeds the safe working load of 241 N. Conversely, if your cycle is light, dropping to an MFCJ25 at 245.3 N saves space. The 75 mm adjustment window here is ideal for trial fits and high-speed changeovers where both the exact extend endpoint and end-of-stroke shock need tuning. Mount via LB foot, FA flange, or TC trunnion (no SDB), and rely on the -S magnet for electronic or reed switch feedback.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MFCJ Adjustable Mini Cylinder MFCJ32X150-75S FAQ
This 32 mm bore cylinder uses a 1/4" port and 12 mm rod. It generates 402.2 N push and 345.6 N pull at 0.5 MPa, 563 N push and 483.8 N pull at 0.7 MPa, with a theoretical maximum of 82 kgf at 1.0 MPa.
No, the variable air cushion only decelerates the piston near the end of travel; it is not a lock or brake, so you need an external rod lock for vertical holding. The external adjuster shortens the extend stroke by up to 75 mm (usable 75-150 mm) but does not lock mid-stroke. The -S magnet enables CMSG, DMSG, or EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MFCJ Cylinders
Request a Quote for Airtac MFCJ Adjustable Mini Cylinder MFCJ32X150-75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.