Airtac MFCJ Adjustable Mini Cylinder MFCJ32X175-100
The AirTAC Airtac MFCJ Adjustable Mini Cylinder MFCJ32X175-100 is a genuine double acting, adjustable stroke + cushion JIS-standard round-body mini air cylinder with a Ø32mm bore and 175mm stroke, 1/4" air ports and a SUS304 stainless-steel barrel for mildly corrosive environments. For the same bore and stroke it is shorter than an ISO 6432 cylinder, saving mounting space.
- BoreØ32 mm
- Stroke175 mm
- Port size1/4"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MFCJ Adjustable Mini Cylinder MFCJ32X175-100
Dial in exact end positions and absorb high-speed impact with the AirTAC MFCJ32X175-100, a JIS-standard round-body mini cylinder built from a SUS304 stainless barrel and riveted aluminium covers. An external adjuster shortens the extend stroke by up to 100 mm on site, while needle variable air cushions at both ends soak up end-of-stroke shock. It runs on a 1/4" port with a 12 mm rod, delivering 402.2 N of push force at 0.5 MPa.
This 32 mm bore unit packs a theoretical maximum of 82 kgf and provides a safe working load of about 241 N. Its compact riveted body is shorter than a comparable ISO 6432 cylinder, saving valuable mounting length. Note that this specific SKU lacks the -S magnet, so it cannot accept CMSG, DMSG, or EMSG position switches.
Airtac MFCJ Adjustable Mini Cylinder MFCJ32X175-100 Technical Specifications
| Model | Airtac MFCJ Adjustable Mini Cylinder MFCJ32X175-100 |
|---|---|
| Series | MFCJ JIS mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 175 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/4" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MF/MFC (JIS-standard) datasheet. Barrel: SUS304 stainless steel; covers: aluminum alloy (round-body, riveted rolling-packed construction). Thread options: PT (blank) / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MFCJ Adjustable Mini Cylinder MFCJ32X175-100
| MFCJ | JIS-standard round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MF-family variants: MF / MFC (double acting ±cushion), MSF / MTF (single acting push / pull), MFD / MFCD (double rod ±cushion), MFJ / MFCJ (adjustable stroke ±cushion). Back covers CA / U / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MFCJ Adjustable Mini Cylinder MFCJ32X175-100 Is Used
Adjustable Tooling Stops
Fine-tune the extend position by up to 100 mm during machine changeovers, relying on the 402.2 N push force to set heavy fixtures accurately.
High-Speed Diverter Arms
Use the variable air cushions to quietly stop the diverter at the end of its 175 mm stroke, preventing shock damage to the 12 mm rod.
Variable Pusher Heads
Dial in the exact push distance for different carton sizes on the fly, safely moving loads up to 241 N without needing to swap cylinders.
Is the Airtac MFCJ Adjustable Mini Cylinder MFCJ32X175-100 the Right Cylinder?
When sizing this adjustable family, compare both bores: this MFCJ32 delivers 402.2 N push at 0.5 MPa, while stepping up to the MFCJ40 provides 628.3 N. If your changeover requires less force, the smaller bores offer lower thrust. Choose this 32 mm option with its 100 mm adjustment window for high-speed trial fits where both the exact extend endpoint and the deceleration shock need field tuning.
Mounting options include LB foot, FA flange, and TC trunnion (no SDB or back-cover code applies here). The variable air cushion only decelerates the piston near the stroke end; it does not lock or hold the load. If gravity or air loss causes drift, install an external rod lock or pilot check valve. Because this SKU has no -S magnet, you must select a magnet-equipped variant for sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MFCJ Adjustable Mini Cylinder MFCJ32X175-100 FAQ
This 32 mm bore cylinder uses a 1/4" port and a 12 mm rod. It generates 402.2 N push and 345.6 N pull at 0.5 MPa, or 563 N push and 483.8 N pull at 0.7 MPa. The theoretical maximum force is 82 kgf at 1.0 MPa.
No, this specific SKU does not include the -S magnet, so it cannot accept CMSG, DMSG, or EMSG switches. You would need the -S variant for sensing. The 100 mm external adjuster only shortens the extend stroke, and the variable air cushions decelerate the piston but do not lock the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MFCJ Cylinders
Request a Quote for Airtac MFCJ Adjustable Mini Cylinder MFCJ32X175-100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.