Airtac MFCJ Adjustable Mini Cylinder MFCJ32X175-40
The AirTAC Airtac MFCJ Adjustable Mini Cylinder MFCJ32X175-40 is a genuine double acting, adjustable stroke + cushion JIS-standard round-body mini air cylinder with a Ø32mm bore and 175mm stroke, 1/4" air ports and a SUS304 stainless-steel barrel for mildly corrosive environments. For the same bore and stroke it is shorter than an ISO 6432 cylinder, saving mounting space.
- BoreØ32 mm
- Stroke175 mm
- Port size1/4"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MFCJ Adjustable Mini Cylinder MFCJ32X175-40
Tune your extend stroke on-site with the AirTAC MFCJ32X175-40, a JIS-standard round-body mini cylinder built from SUS304 stainless steel and riveted aluminium covers. An external adjuster shortens the extend end by up to 40 mm (usable range 135-175 mm), while a needle variable air cushion at both ends soaks up high-speed shock for smooth deceleration.
Delivering 402.2 N push force at 0.5 MPa through a 1/4" port, this double-acting unit is shorter than an ISO 6432 cylinder for the same bore and stroke, saving mounting length. The SUS304 barrel resists mild corrosion and washdown. With a safe working load around 241 N, it lifts about 20.5 kg vertically with a 2:1 margin. Note this SKU lacks a magnet, so it cannot take a sensor.
Airtac MFCJ Adjustable Mini Cylinder MFCJ32X175-40 Technical Specifications
| Model | Airtac MFCJ Adjustable Mini Cylinder MFCJ32X175-40 |
|---|---|
| Series | MFCJ JIS mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 175 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/4" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MF/MFC (JIS-standard) datasheet. Barrel: SUS304 stainless steel; covers: aluminum alloy (round-body, riveted rolling-packed construction). Thread options: PT (blank) / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MFCJ Adjustable Mini Cylinder MFCJ32X175-40
| MFCJ | JIS-standard round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MF-family variants: MF / MFC (double acting ±cushion), MSF / MTF (single acting push / pull), MFD / MFCD (double rod ±cushion), MFJ / MFCJ (adjustable stroke ±cushion). Back covers CA / U / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MFCJ Adjustable Mini Cylinder MFCJ32X175-40 Is Used
High-Speed Changeover Press
Dial in the 40 mm extend window during product changeovers to vary the pressing depth of light 240 N assemblies without swapping cylinders.
Adjustable Transfer Diverter
Fine-tune the diverter arm reach on the fly while the variable air cushion absorbs the shock of high-speed package routing at 800 mm/s.
Vertical Lift Stopper
Lift or stop goods up to 20.5 kg vertically, adjusting the extend stop position by 40 mm to handle varying pallet heights smoothly.
Is the Airtac MFCJ Adjustable Mini Cylinder MFCJ32X175-40 the Right Cylinder?
Choose the MFCJ32X175-40 when you need mid-range thrust combined with on-site stroke tuning. It delivers 402.2 N push at 0.5 MPa, sitting between the MFCJ25 at 245.3 N and the MFCJ40 at 628.3 N. If your changeover requires precise extend positioning and end-of-stroke shock absorption at speed, the 40 mm adjustable window and variable air cushion are ideal.
Remember the cushion only decelerates the piston near stroke end; it is not a lock or brake. The piston will drift on air loss, so fit an external rod lock or pilot check valve to hold a load. Mount via LB foot, FA flange, or TC trunnion. Because this SKU has no -S magnet, it cannot accept CMSG, DMSG, or EMSG switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MFCJ Adjustable Mini Cylinder MFCJ32X175-40 FAQ
This 32 mm bore cylinder has a 1/4" port and male M10x1.25 rod thread. It generates 402.2 N push and 345.6 N pull at 0.5 MPa, 563 N push and 483.8 N pull at 0.7 MPa, with a theoretical max of 82 kgf at 1.0 MPa.
No, this specific SKU does not include a magnet, so it cannot accept CMSG, DMSG, or EMSG switches. You must choose the -S variant for sensing. The external adjuster shortens the extend stroke by up to 40 mm but does not lock the position mid-stroke.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MFCJ Cylinders
Request a Quote for Airtac MFCJ Adjustable Mini Cylinder MFCJ32X175-40
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.