Airtac MFCJ Adjustable Mini Cylinder MFCJ32X75-10S
The AirTAC Airtac MFCJ Adjustable Mini Cylinder MFCJ32X75-10S is a genuine double acting, adjustable stroke + cushion JIS-standard round-body mini air cylinder with a Ø32mm bore and 75mm stroke, 1/4" air ports and a SUS304 stainless-steel barrel for mildly corrosive environments. For the same bore and stroke it is shorter than an ISO 6432 cylinder, saving mounting space.
- BoreØ32 mm
- Stroke75 mm
- Port size1/4"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MFCJ Adjustable Mini Cylinder MFCJ32X75-10S
Trim the extend stroke by up to 10 mm on site with the AirTAC MFCJ32X75-10S, a JIS-standard round-body mini cylinder built from a SUS304 stainless barrel and riveted aluminium covers. The double-acting piston delivers 402.2 N of push force at 0.5 MPa, and the integrated magnet (-S) supports CMSG, DMSG or EMSG switches for position sensing.
Variable needle air cushions at both ends soak up high-speed end-of-stroke shock, while the compact JIS body saves mounting length compared to an ISO 6432 unit. Driven by a 1/4" port and a 12 mm rod with an M10x1.25 male thread, it yields a safe working load of roughly 241 N, lifting about 20.5 kg vertically with a 2:1 margin.
Airtac MFCJ Adjustable Mini Cylinder MFCJ32X75-10S Technical Specifications
| Model | Airtac MFCJ Adjustable Mini Cylinder MFCJ32X75-10S |
|---|---|
| Series | MFCJ JIS mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/4" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MF/MFC (JIS-standard) datasheet. Barrel: SUS304 stainless steel; covers: aluminum alloy (round-body, riveted rolling-packed construction). Thread options: PT (blank) / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MFCJ Adjustable Mini Cylinder MFCJ32X75-10S
| MFCJ | JIS-standard round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MF-family variants: MF / MFC (double acting ±cushion), MSF / MTF (single acting push / pull), MFD / MFCD (double rod ±cushion), MFJ / MFCJ (adjustable stroke ±cushion). Back covers CA / U / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MFCJ Adjustable Mini Cylinder MFCJ32X75-10S Is Used
High-Speed Component Pressing
Dial in the exact 65-75 mm extend position on the fly while the variable air cushion absorbs the 402.2 N impact during rapid assembly presses.
Dynamic Sorting Diverter
Tune the extend stop precisely for mixed product sizes, letting the needle cushion quietly decelerate the 32 mm bore at high cycle rates.
Light Pallet Positioning
Shift loads up to 20.5 kg vertically with a 2:1 safety margin, using the 10 mm stroke adjuster to clear varying pallet heights without changing mounts.
Is the Airtac MFCJ Adjustable Mini Cylinder MFCJ32X75-10S the Right Cylinder?
Weigh the MFCJ32X75-10S against the adjacent bores to match your force needs. The 32 mm bore pushes 402.2 N at 0.5 MPa, sitting neatly below the 628.3 N of the MFCJ40 and well above the 245.3 N of the MFCJ25. Choose this 32 mm option when your changeover requires moderate push force alongside a 10 mm external stroke adjustment window.
The variable air cushion is invaluable for high-speed trial fits where end-of-stroke shock must be tuned out, but it only decelerates the piston and never acts as a lock. If air pressure drops, the load drifts, so fit an external rod lock or pilot check valve for holding. Mount via LB foot, FA flange or TC trunnion (no SDB), and rely on the -S magnet for sensor feedback.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MFCJ Adjustable Mini Cylinder MFCJ32X75-10S FAQ
This double-acting 32 mm bore cylinder uses a 1/4" port and a 12 mm rod with an M10x1.25 male thread. It generates 402.2 N push and 345.6 N pull at 0.5 MPa, 563 N push and 483.8 N pull at 0.7 MPa, with a theoretical maximum force of 82 kgf at 1.0 MPa.
The external adjuster shortens the extend stroke by up to 10 mm, giving a usable 65-75 mm range, while the retract stroke remains full. Needle variable air cushions at both ends decelerate the piston near the ends to reduce shock, but this is not a brake; the -S magnet enables CMSG/DMSG/EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MFCJ Cylinders
Request a Quote for Airtac MFCJ Adjustable Mini Cylinder MFCJ32X75-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.