Airtac MFJ Adjustable Mini Cylinder MFJ25X150-100
The AirTAC Airtac MFJ Adjustable Mini Cylinder MFJ25X150-100 is a genuine double acting, adjustable stroke JIS-standard round-body mini air cylinder with a Ø25mm bore and 150mm stroke, 1/8" air ports and a SUS304 stainless-steel barrel for mildly corrosive environments. For the same bore and stroke it is shorter than an ISO 6432 cylinder, saving mounting space.
- BoreØ25 mm
- Stroke150 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM10×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MFJ Adjustable Mini Cylinder MFJ25X150-100
Dial in your extend end-position on site with the AirTAC MFJ25X150-100, a JIS-standard round-body mini cylinder featuring a 100 mm adjustment window. This double-acting actuator uses a riveted aluminium head and SUS304 stainless steel barrel to resist mild washdown corrosion while saving mounting length compared to an ISO 6432 unit.
Delivering 245.3 N of push force at 0.5 MPa through a 1/8" port, it yields a safe working load of roughly 147 N. The external adjuster shortens the extend stroke down to 50 mm without buying a new cylinder, making it ideal for line changeovers. This non-magnet SKU cannot take a sensor.
Airtac MFJ Adjustable Mini Cylinder MFJ25X150-100 Technical Specifications
| Model | Airtac MFJ Adjustable Mini Cylinder MFJ25X150-100 |
|---|---|
| Series | MFJ JIS mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 150 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MF/MFC (JIS-standard) datasheet. Barrel: SUS304 stainless steel; covers: aluminum alloy (round-body, riveted rolling-packed construction). Thread options: PT (blank) / G / NPT.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MFJ Adjustable Mini Cylinder MFJ25X150-100
| MFJ | JIS-standard round-body mini cylinder (adjustable-stroke). |
|---|---|
| 25 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MF-family variants: MF / MFC (double acting ±cushion), MSF / MTF (single acting push / pull), MFD / MFCD (double rod ±cushion), MFJ / MFCJ (adjustable stroke ±cushion). Back covers CA / U / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MFJ Adjustable Mini Cylinder MFJ25X150-100 Is Used
Changeover Stations
Swap product families and twist the external adjuster to shorten the 150 mm extend stroke by up to 100 mm, hitting new push positions without swapping hardware.
Trial Fit Rigs
Dial in the exact endpoint during prototype builds where the final extension is unknown, leveraging the 245.3 N push force to test part seating.
Variable Position Stops
Replace hard external stops with the built-in adjuster to set precise 50 to 150 mm extend lengths for varying component heights on the same line.
Is the Airtac MFJ Adjustable Mini Cylinder MFJ25X150-100 the Right Cylinder?
When sizing this series, compare the real 0.5 MPa push forces: the MFJ20 delivers 157 N, this MFJ25 provides 245.3 N, and the larger MFJ32 outputs 402.2 N. Choose the 25 mm bore when your payload sits in the middle, then use the 100 mm adjuster to fine-tune the extend endpoint during commissioning or trial fits.
Mounting options include LB foot, FA flange, and TC trunnion (no SDB). Remember that the fixed TPU bumpers only decelerate the stroke end; they do not lock the piston. To hold a vertical load on air loss, install an external rod lock or pilot check valve. If you need position sensing, select the -S magnet variant for CMSG/DMSG/EMSG switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MFJ Adjustable Mini Cylinder MFJ25X150-100 FAQ
This 25 mm bore cylinder features a 1/8" port and a 10 mm male rod thread (M10x1.25). It generates 245.3 N push and 206.1 N pull at 0.5 MPa, 343.4 N push and 288.5 N pull at 0.7 MPa, with a theoretical max of 50 kgf at 1.0 MPa.
The external adjuster shortens the extend stroke by up to 100 mm on site, giving a usable 50 to 150 mm range. The retract stroke remains full length. Fixed TPU bumper pads decelerate the stroke end, but they do not lock the load. Note this non-S SKU lacks a magnet and cannot host CMSG/DMSG/EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MFJ Adjustable Mini Cylinder MFJ25X150-100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.