Airtac MICD Air Cushion Double Rod Mini Cylinder MICD32X75S
The AirTAC Airtac MICD Air Cushion Double Rod Mini Cylinder MICD32X75S is a genuine double acting, double rod + cushion round-body mini air cylinder with a Ø32mm bore and 75mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke75 mm
- Port size1/4"
- Acting typeDouble acting, double rod + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
About the Airtac MICD Air Cushion Double Rod Mini Cylinder MICD32X75S
Twin piston rods exit both end covers of this stainless-steel round-body mini cylinder, yielding equal force in both directions (345.6 N at 0.5 MPa) while resisting rotation. The adjustable air cushion at each end soaks up end-of-stroke shock, making it ideal for fast, guided moves. Because it is a larger Ø32 bore, it uses a 1/4" port and falls outside the ISO 6432 mounting standard.
The stainless barrel and rod resist mild corrosion and washdown environments. Equipped with a built-in magnet (-S), it supports CMSG, DMSG, and EMSG sensors for position detection. Based on the 0.5 MPa rating, a safe working load is roughly 207 N, which translates to lifting about 17.6 kg vertically with a 2:1 safety margin.
Airtac MICD Air Cushion Double Rod Mini Cylinder MICD32X75S Technical Specifications
| Model | Airtac MICD Air Cushion Double Rod Mini Cylinder MICD32X75S |
|---|---|
| Series | MICD mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting, double rod + cushion |
| Port size | 1/4" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac MICD Air Cushion Double Rod Mini Cylinder MICD32X75S
| MICD | round-body mini cylinder (double-rod, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICD Air Cushion Double Rod Mini Cylinder MICD32X75S Is Used
Product Diverting
Equal force both ways and twin-rod anti-rotation make this cylinder ideal for smoothly diverting packages on a high-speed conveyor belt.
Component Pressing
The adjustable air cushions absorb end-of-stroke shock during light component pressing, protecting fragile assemblies from impact damage.
Pallet Stopper
Use the rear rod extension as a hard stop or to trip a limit switch, while the front rod cycles a 17.6 kg pallet load with precision.
Is the Airtac MICD Air Cushion Double Rod Mini Cylinder MICD32X75S the Right Cylinder?
If you need less push, the smaller MICD25 bore provides 206.1 N at 0.5 MPa, while stepping up to the larger MICD40 offers 527.8 N. Choose this double-rod configuration with adjustable cushions when your application demands equal force both ways and shock absorption at high speeds. Note that the SDB pivot block is not available on this double-rod variant; use LB, FA, or TC mountings instead.
Remember that the air cushion only decelerates the piston near the stroke end and does not lock or hold the load. If air pressure drops, the piston will drift; for true load holding, install an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICD Air Cushion Double Rod Mini Cylinder MICD32X75S FAQ
Because a rod exits both ends, the force is equal both ways. It generates 345.6 N at 0.5 MPa, 483.8 N at 0.7 MPa, and a maximum theoretical force of 70.5 kgf at 1.0 MPa. It features a 1/4" air port.
No, the adjustable air cushion only decelerates the piston near the end of the stroke and is not a brake. The piston will drift on air loss. For load holding, you need an external rod lock or pilot check valve. The -S magnet allows CMSG/DMSG/EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICD Cylinders
Request a Quote for Airtac MICD Air Cushion Double Rod Mini Cylinder MICD32X75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.