Airtac MICJ Adjustable Mini Cylinder MICJ16X100-100
The AirTAC MICJ Adjustable Mini Cylinder MICJ16X100-100 is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø16mm bore and 100mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke100 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ16X100-100
Dial in a precise forward stop on-site with the AirTAC MICJ16X100-100, a stainless-steel round-body mini cylinder built for double-acting service. An external stop screw trims the extend end position by up to 100 mm, while a needle-set adjustable air cushion at both ends soaks up high-speed shock. The Ø16 mm bore runs on an M5×0.8 port and conforms to the ISO 6432 mounting interface for standard mini brackets.
This SKU ships without a magnet, so it cannot host CMSG/DMSG/EMSG sensors. The stainless barrel and rod resist mild washdown corrosion, and the cushion strictly decelerates near the stroke end—it is not a mid-stroke lock.
Airtac MICJ Adjustable Mini Cylinder MICJ16X100-100 Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ16X100-100 |
|---|---|
| Series | MICJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 100 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ16X100-100
| MICJ | ISO 6432 round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -100 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ16X100-100 Is Used
Light Parts Ejection
Pushes small plastic parts out of a mold using a 100.5 N extend force, with the 100 mm stop screw tuned to the exact drop distance.
Package Deflection
Diverts lightweight cartons on a line; the adjustable air cushion absorbs the impact of high-speed 30-800 mm/s strokes.
Lab Dispense Head
Moves a 5 kg fluid dispense head vertically, relying on the stainless construction for mild washdown resistance.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ16X100-100 the Right Cylinder?
The 100 mm extend adjuster is ideal for fast set-position moves where you need to tune the forward stop without swapping cylinders. If the application requires position holding on air loss, add an external rod lock or pilot check valve, as the piston will drift.
Mounting options include LB foot, FA flange, and TC trunnion; note that the SDB pivot-block is not available on this adjustable-stroke variant. Because this specific SKU lacks the -S magnet, it cannot support magnetic sensing—select the -S version if you need CMSG, DMSG, or EMSG switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ16X100-100 FAQ
This 16 mm bore cylinder features an M5×0.8 port and an M6x1.0 male rod thread.
An external screw shortens the extend stroke by up to 100 mm on-site, while the needle-set air cushion at both ends decelerates the piston near the ends to absorb high-speed shock. This SKU has no -S magnet, so it cannot take sensors, and the cushion/stop screw do not lock or hold the load—if air is lost, the piston drifts.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ16X100-100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.