Airtac MICJ Adjustable Mini Cylinder MICJ16X100-30S
The AirTAC MICJ Adjustable Mini Cylinder MICJ16X100-30S is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø16mm bore and 100mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke100 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ16X100-30S
Dial in the forward stop on site with the AirTAC MICJ16X100-30S, a stainless-steel round-body mini cylinder that shortens the extend stroke by up to 30 mm via an external screw. The usable extend range becomes 70-100 mm, while retract remains the full 100 mm. An adjustable air cushion at both ends soaks up high-speed shock, letting you set the position and control the impact simultaneously.
Built to the ISO 6432 mounting interface, this double-acting Ø16 bore drops into standard mini brackets and uses an M5×0.8 port with an M6x1.0 male rod thread. The -S suffix means a built-in magnet enables CMSG, DMSG or EMSG sensors, and the stainless barrel and rod resist mild corrosion in washdown settings.
Airtac MICJ Adjustable Mini Cylinder MICJ16X100-30S Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ16X100-30S |
|---|---|
| Series | MICJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 100 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ16X100-30S
| MICJ | ISO 6432 round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ16X100-30S Is Used
Light Part Ejection
Push small plastic parts out of a mold at speed, relying on the 30 mm extend stop to dial in the exact ejection distance while the dual air cushions absorb the impact.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ16X100-30S the Right Cylinder?
This adjustable-stop plus cushion combination shines in fast set-position moves where you must trim the forward endpoint without swapping cylinders. Mount using LB foot, FA flange or TC trunnion brackets, as the SDB pivot-block is not offered on this adjustable variant. Remember the stop screw sets the end position but is not a mid-stroke lock; the piston will drift on air loss, so fit an external rod lock or pilot check valve to hold a suspended load.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ16X100-30S FAQ
The theoretical maximum force is 20.5 kgf at 1.0 MPa.
An external screw shortens the extend stroke by up to 30 mm on site, giving a usable forward range of 70-100 mm, while the needle-set air cushion at both ends decelerates the piston near stroke end. The -S suffix indicates a built-in piston magnet for CMSG, DMSG or EMSG sensors; the cushion only decelerates and does not lock the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ16X100-30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.