Airtac MICJ Adjustable Mini Cylinder MICJ16X175-100S
The AirTAC MICJ Adjustable Mini Cylinder MICJ16X175-100S is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø16mm bore and 175mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke175 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ16X175-100S
Dial in a precise forward stop on-site with the AirTAC MICJ16X175-100S, a stainless-steel round-body mini cylinder featuring a 100 mm extend-stroke adjuster. An external screw trims the forward end position down to a 75 mm usable extend without swapping hardware, while a needle-set variable air cushion at both ends soaks up high-speed shock.
Built with a mildly corrosion-resistant stainless barrel and rod, it handles washdown environments and conforms to the ISO 6432 mounting interface for standard mini brackets. The -S suffix equips the piston with a magnet for CMSG, DMSG, or EMSG sensors.
Airtac MICJ Adjustable Mini Cylinder MICJ16X175-100S Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ16X175-100S |
|---|---|
| Series | MICJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 175 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ16X175-100S
| MICJ | ISO 6432 round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -100 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ16X175-100S Is Used
Variable Flap Folding
Adjust the forward stop on the fly for different carton depths, using the dual air cushions to absorb the impact of high-speed folding arms without jarring the 5 kg load limit.
Washdown Diverter
Leverage the stainless steel construction and ISO 6432 mini bracket to mount a routing gate in a damp food-packaging line, tuning the extend position to deflect light pouches.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ16X175-100S the Right Cylinder?
The 100 mm extend trim shines in fast set-position moves where you must tune the forward stop on the fly, and the dual air cushions prevent end-of-stroke banging at speeds up to 800 mm/s. Note that the stop screw sets the end position but is not a mid-stroke lock; the piston will drift on air loss, so add an external rod lock or pilot check valve for suspended loads. Mount via LB foot, FA flange, or TC trunnion (SDB is unavailable here), and use the -S magnet for switch readiness.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ16X175-100S FAQ
This 16 mm bore cylinder uses an M5×0.8 air port. The theoretical maximum force is 20.5 kgf at 1.0 MPa.
An external stop screw shortens the extend stroke by up to 100 mm (usable extend 75-175 mm); retract remains full. Needle-set variable air cushions at both ends decelerate the piston near stroke end but do not lock the load. The -S suffix means a piston magnet is built-in for CMSG, DMSG, or EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ16X175-100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.