Airtac MICJ Adjustable Mini Cylinder MICJ16X225-50S
The AirTAC MICJ Adjustable Mini Cylinder MICJ16X225-50S is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø16mm bore and 225mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke225 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ16X225-50S
Trim the forward stop by up to 50 mm on site without swapping hardware using this AirTAC MICJ16X225-50S mini cylinder. The external screw shortens the extend end position (usable range 175-225 mm), while a needle-set air cushion at both ends soaks up high-speed shock. It is a double-acting, round-body stainless steel unit that drops into standard ISO 6432 mini-cylinder brackets.
The M5×0.8 port and M6x1.0 male rod thread match the 16 mm bore. The -S suffix means a built-in magnet supports CMSG, DMSG and EMSG sensors for position feedback.
Airtac MICJ Adjustable Mini Cylinder MICJ16X225-50S Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ16X225-50S |
|---|---|
| Series | MICJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 225 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ16X225-50S
| MICJ | ISO 6432 round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| -50 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ16X225-50S Is Used
High-Speed Diverting
Sniff out a specific forward stroke on a fast conveyor gate; the dual air cushions absorb the kinetic energy of rapid 16 mm bore actuation without slamming.
Washdown Sorting
Lift or push roughly 5 kg cartons in damp packaging areas; the stainless barrel and rod resist mild corrosion while the magnet enables position tracking.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ16X225-50S the Right Cylinder?
For lighter duty, the 16 mm bore is the smallest cushioned option; smaller 8/10/12 bores lack the cushion build. If you need more force, stepping up to the 25 mm bore raises push force to 245.3 N at 0.5 MPa. This 16 mm model excels when you need fast, repeatable set-position moves and want to dial in the exact extend stop.
The stop screw sets the end position but is not a mid-stroke lock; the piston drifts on air loss, so add an external rod lock or pilot check valve to hold a suspended load. Use LB, FA or TC mounts (SDB is not available on this adjustable variant). The -S magnet enables CMSG/DMSG/EMSG switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ16X225-50S FAQ
At 0.5 MPa it pushes 100.5 N and pulls 86.4 N; at 0.7 MPa it pushes 140.7 N and pulls 120.9 N. The theoretical max force is 20.5 kgf at 1.0 MPa. This 16 mm bore cylinder uses an M5×0.8 port.
An external screw shortens the extend stroke by up to 50 mm on site, while a needle valve adjusts the air cushion at both ends to decelerate the piston before impact. The -S suffix indicates a built-in piston magnet for CMSG, DMSG or EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ16X225-50S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.