Airtac MICJ Adjustable Mini Cylinder MICJ16X60-10S
The AirTAC MICJ Adjustable Mini Cylinder MICJ16X60-10S is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø16mm bore and 60mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke60 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ16X60-10S
Trimming the forward stop by up to 10 mm on site, this double-acting stainless steel round-body mini cylinder lets you dial in a 50-60 mm extend position without swapping hardware. A needle-set adjustable air cushion at both ends soaks up high-speed shock, while the ISO 6432 mounting interface drops directly into standard mini brackets.
The built-in magnet (-S) supports CMSG, DMSG and EMSG sensors, and the M5×0.8 port feeds the 30-800 mm/s speed range.
Airtac MICJ Adjustable Mini Cylinder MICJ16X60-10S Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ16X60-10S |
|---|---|
| Series | MICJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 60 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ16X60-10S
| MICJ | ISO 6432 round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ16X60-10S Is Used
Micro-Clamp Dial-In
Trimming the 10 mm extend stop lets you set exact 50-60 mm clamping reach for delicate 5 kg assemblies, while the dual air cushions absorb the impact of rapid 800 mm/s moves.
Film Feed Tensioning
The stainless barrel shrugs off washdown, while the on-site extend adjustment fine-tunes the feed roll position without changing the full 60 mm retract stroke.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ16X60-10S the Right Cylinder?
Moving up to a 20 mm bore raises push to 157 N when this model stalls. The external screw sets the extend end position only; it will not lock the piston mid-stroke or hold a load on air loss—add a pilot check valve for that. Use LB, FA or TC mounts (SDB is not offered here) and pair the -S magnet with CMSG/DMSG/EMSG switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ16X60-10S FAQ
The theoretical maximum force is 20.5 kgf at 1.0 MPa.
An external screw shortens the extend stroke by up to 10 mm (retract remains full), and a needle valve adjusts the air cushion at both ends to decelerate high-speed moves. The -S magnet enables CMSG/DMSG/EMSG sensors. It does not hold position on air loss—use an external rod lock for that.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ16X60-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.