Airtac MICJ Adjustable Mini Cylinder MICJ20X200-10
The AirTAC Airtac MICJ Adjustable Mini Cylinder MICJ20X200-10 is a genuine double acting, adjustable stroke + cushion round-body mini air cylinder with a Ø20mm bore and 200mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ20 mm
- Stroke200 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM8×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ20X200-10
Dial in a precise forward stop without swapping hardware using the AirTAC MICJ20X200-10, a stainless-steel round-body mini cylinder with a 10 mm extend-stroke adjuster. The external screw trims the forward end position on site, while a needle-set variable air cushion at both ends soaks up high-speed shock. This double-acting actuator delivers 157 N of push force at 0.5 MPa, yielding a safe working load of roughly 94 N or an 8 kg vertical lift with a 2:1 margin.
Built with a riveted stainless barrel and an 8 mm rod, it resists mild corrosion and washdown environments. It uses the ISO 6432 mounting interface for standard mini brackets and features a 1/8" port. Note this specific SKU lacks a magnet, so it cannot host CMSG, DMSG, or EMSG sensors without upgrading to the -S variant.
Airtac MICJ Adjustable Mini Cylinder MICJ20X200-10 Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ20X200-10 |
|---|---|
| Series | MICJ ISO 6432 mini cylinder |
| Bore size | Ø20 mm |
| Stroke | 200 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø20mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | 185 N |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ20X200-10
| MICJ | ISO 6432 round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 20 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ20X200-10 Is Used
Package Diverter Gate
Shifts lightweight boxes at high speed on a sorting line, using the 10 mm extend adjuster to fine-tune the gate angle and the dual air cushions to prevent end-of-stroke slamming.
Film Roll Tensioner
Maintains web tension in a packaging machine, pushing with 157 N at 0.5 MPa while the needle-bleed cushion decelerates the 200 mm stroke to protect the stainless rod.
Bin Lid Actuator
Opens and closes access hatches on material bins, relying on the 8 kg vertical lift capacity and the external stop screw to set the exact open height without repositioning brackets.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ20X200-10 the Right Cylinder?
When sizing this 20 mm bore, stepping down is not an option for cushioned tasks, as the smaller 16 mm bore only provides 100.5 N of push at 0.5 MPa. If your application requires more force, the 32 mm bore delivers 402.2 N at 0.5 MPa. The MICJ20X200-10 is ideal when you need fast, settable-position moves up to 800 mm/s. The 10 mm stop screw sets the end position but is not a mid-stroke lock; the piston will drift on air loss, so add an external rod lock or pilot check valve for held loads.
Mounting options include LB foot, FA flange, and TC trunnion, but the SDB pivot-block is unavailable on this adjustable-stroke build. Because this SKU has no magnet, position sensing is impossible on this exact unit.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ20X200-10 FAQ
This 20 mm bore cylinder uses a 1/8" port and an M8x1.25 male rod thread. It generates 157 N push and 131.9 N pull at 0.5 MPa, 219.8 N push and 184.7 N pull at 0.7 MPa, with a theoretical maximum of 32 kgf at 1.0 MPa.
An external screw shortens the extend stroke by up to 10 mm on site, giving a usable 190-200 mm forward travel, while the needle-set variable air cushion at both ends only decelerates the piston near stroke end. The cylinder does not hold position on air loss and drifts; use an external rod lock for holding. This SKU has no magnet, so it cannot take sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ20X200-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.