Airtac MICJ Adjustable Mini Cylinder MICJ32X160-40
The AirTAC Airtac MICJ Adjustable Mini Cylinder MICJ32X160-40 is a genuine double acting, adjustable stroke + cushion round-body mini air cylinder with a Ø32mm bore and 160mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke160 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ32X160-40
Trim the forward stop by up to 40 mm on-site without swapping hardware using this stainless-steel round-body mini cylinder. The MICJ32X160-40 is a double-acting actuator featuring a 1/8" port, a 12 mm piston rod, and an adjustable air cushion at both ends to absorb high-speed impact. Usable extend ranges from 120 to 160 mm, while retract remains full.
Delivering 402.2 N of push force at 0.5 MPa, it easily handles a safe working load of roughly 241 N or lifts about 20.5 kg vertically with a 2:1 margin. The stainless barrel and rod resist mild corrosion and washdown environments. Note that this non-ISO-6432 32 mm bore SKU lacks a magnet, so it cannot accept CMSG, DMSG, or EMSG sensors.
Airtac MICJ Adjustable Mini Cylinder MICJ32X160-40 Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ32X160-40 |
|---|---|
| Series | MICJ mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 160 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ32X160-40
| MICJ | round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -40 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ32X160-40 Is Used
Package Diverting
Dial in the 120-160 mm extend stroke to push 20 kg cartons precisely at 800 mm/s while the dual air cushions absorb the high-speed shock.
Fill Station Sealing
Trim the forward stop by 40 mm to seal varying container heights on the fly, using the 402.2 N push force to secure light washdown loads.
Pallet Stop Gate
Set a hard forward limit for pallet routing without changing cylinders, relying on the stainless rod to endure mildly humid staging areas.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ32X160-40 the Right Cylinder?
For lighter duty, the 25 mm bore yields 245.3 N push at 0.5 MPa, whereas stepping up to the 40 mm bore provides 628.3 N. This 32 mm bore hits a solid middle ground. The external stop screw and needle-set cushions are ideal for fast, repeatable set-position moves, but remember the screw only sets the end position—it is not a mid-stroke lock. The piston will drift on air loss, so add an external rod lock or pilot check valve for held loads.
Mount using LB foot, FA flange, or TC trunnion brackets (SDB pivot-block is not available on this adjustable variant). Back cover options include CA, U, R, and CM. Because this specific SKU has no -S magnet, position sensing is impossible; choose the -S version if you require CMSG, DMSG, or EMSG switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ32X160-40 FAQ
This 32 mm bore double-acting cylinder uses a 1/8" port and a 12 mm rod. It generates 402.2 N push and 345.6 N pull at 0.5 MPa, or 563 N push and 483.8 N pull at 0.7 MPa. The theoretical maximum force is 82 kgf at 1.0 MPa.
An external screw shortens the extend end position by up to 40 mm (usable extend 120-160 mm), while needle valves tune the adjustable air cushions at both ends to decelerate high-speed moves. The cushions only slow the piston near stroke end and do not act as a brake; the cylinder cannot hold position on air loss. This SKU lacks a magnet, so it cannot take sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ32X160-40
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.