Airtac MICJ Adjustable Mini Cylinder MICJ32X160-50S
The AirTAC Airtac MICJ Adjustable Mini Cylinder MICJ32X160-50S is a genuine double acting, adjustable stroke + cushion round-body mini air cylinder with a Ø32mm bore and 160mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke160 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ32X160-50S
Dial in forward stops on-site with the AirTAC MICJ32X160-50S, a stainless-steel round-body mini cylinder featuring a 50mm extend-stroke adjuster and dual adjustable air cushions. The external stop screw trims the forward end position down from the 160mm nominal stroke to 110mm, letting you set exact reach without swapping hardware. A needle valve at each end soaks up high-speed shock to protect payloads.
Built with a 32mm bore and 1/8" port, this double-acting actuator delivers 402.2N push and 345.6N pull at 0.5MPa. The stainless barrel and rod resist mild corrosion and washdown environments. Equipped with a piston magnet (-S), it supports CMSG, DMSG, and EMSG sensors for position feedback. It provides a safe working load of about 241N, easily moving roughly 20.5kg vertically with a 2:1 safety margin.
Airtac MICJ Adjustable Mini Cylinder MICJ32X160-50S Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ32X160-50S |
|---|---|
| Series | MICJ mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 160 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ32X160-50S
| MICJ | round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -50 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ32X160-50S Is Used
Package Diverting
Uses the 50mm extend adjuster to set the exact pusher extension for various box sizes on a 32mm bore line, relying on air cushions to silently absorb high-speed 402.2N impacts.
Clamp Positioning
Dials in the forward clamping stop on machining fixtures without custom spacers, using the 160mm stroke to reach deep parts while the needle cushion decelerates the toolhead.
Vertical Lift Gates
Lifts roughly 20.5kg access doors using the 0.5MPa push force, setting the precise open height via the external screw while the stainless construction handles humid settings.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ32X160-50S the Right Cylinder?
For lighter tasks requiring less reach, the MICJ25 series steps down to 245.3N push at 0.5MPa, while the larger MICJ40 jumps to 628.3N if you need to move heavier assemblies. Choose this 32mm bore when your application demands high-speed set-position moves where the 50mm extend stop dials in the exact endpoint and the dual air cushions absorb end-of-stroke impact.
Remember that the stop screw sets the forward end position but does not lock the piston mid-stroke; a plain cylinder drifts on air loss, so add an external rod lock or pilot check valve for held loads. Mount using LB foot, FA flange, or TC trunnion brackets (SDB pivot-block is not offered on this adjustable variant). The built-in magnet pairs directly with CMSG, DMSG, or EMSG switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ32X160-50S FAQ
This 32mm bore double-acting cylinder uses a 1/8" port and delivers 402.2N push / 345.6N pull at 0.5MPa, and 563N push / 483.8N pull at 0.7MPa. The theoretical maximum force is 82kgf at 1.0MPa.
An external stop screw shortens the extend stroke by up to 50mm (usable range 110-160mm) to set the forward position; retract remains full. Adjustable air cushions at both ends use needle valves to decelerate the piston at high speed. The -S suffix means it has a built-in magnet for CMSG/DMSG/EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ32X160-50S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.