Airtac MICJ Adjustable Mini Cylinder MICJ32X30-10
The AirTAC Airtac MICJ Adjustable Mini Cylinder MICJ32X30-10 is a genuine double acting, adjustable stroke + cushion round-body mini air cylinder with a Ø32mm bore and 30mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke30 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ32X30-10
Dial in exact forward stops on-site with the AirTAC MICJ32X30-10, a stainless-steel round-body mini cylinder featuring a 10 mm extend-stroke adjuster. An external screw trims the forward end position down to 20 mm without swapping hardware, while a needle-set air cushion at both ends absorbs high-speed impact. This double-acting actuator delivers 402.2 N of push force at 0.5 MPa.
Built with a 32 mm bore, 12 mm rod, and a 1/8" port, it provides a safe working load near 241 N and a vertical lift capacity of roughly 20.5 kg with a 2:1 margin. The stainless barrel and rod resist mild corrosion and washdown environments. Note this non-magnetic SKU cannot accept position sensors; adding the -S variant enables CMSG, DMSG, or EMSG switches.
Airtac MICJ Adjustable Mini Cylinder MICJ32X30-10 Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ32X30-10 |
|---|---|
| Series | MICJ mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 30 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ32X30-10
| MICJ | round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ32X30-10 Is Used
Sorting Diverter
Tunes a 20 to 30 mm extend stroke to deflect packages on a conveyor, using the dual air cushions to absorb the shock of rapid 402 N push moves.
Carton Flap Folder
Adjusts the forward stop precisely to clear various box heights while the needle cushion decelerates the rod before it strikes the carton.
Light Press Fit
Delivers a safe 241 N working load to seat small bearings, relying on the external screw to set exact bottoming depth without reprogramming.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ32X30-10 the Right Cylinder?
This 32 mm bore generates 402.2 N push at 0.5 MPa, sitting above the 25 mm bore (245.3 N) and below the 40 mm bore (628.3 N). The 10 mm extend adjuster and dual air cushions excel in fast set-position moves where you must tune the forward stop and decelerate the load smoothly. The stop screw sets the end position but is not a mid-stroke lock; the piston will drift on air loss, so use an external rod lock or pilot check valve to hold a suspended load.
Mount using LB foot, FA flange, or TC trunnion brackets, plus CA, U, R, or CM back covers. The SDB pivot block is not available on this adjustable-stroke variant. Because this SKU lacks a magnet, it cannot support magnetic sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ32X30-10 FAQ
This 32 mm bore cylinder uses a 1/8" port and generates 402.2 N push and 345.6 N pull at 0.5 MPa. At 0.7 MPa it provides 563 N push and 483.8 N pull. The theoretical maximum force is 82 kgf at 1.0 MPa.
An external screw shortens the extend stroke by up to 10 mm, setting the forward end position without affecting the full retract. Needle valves adjust the air cushions at both ends to decelerate the piston at high speed, but this is not a mid-stroke lock. The piston drifts on air loss, so use a pilot check valve for load holding. This non-S SKU lacks a magnet and cannot take sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ32X30-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.