
The AirTAC MICJ Adjustable Mini Cylinder MICJ40X450-75S is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø40mm bore and 450mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
Dial in a precise forward stop on-site with the AirTAC MICJ40X450-75S, a round-body stainless-steel mini cylinder that shortens the extend stroke by up to 75 mm via an external screw. The stainless barrel and rod resist mild corrosion and washdown environments.
The built-in magnet (-S) supports CMSG, DMSG, and EMSG position switches. It uses a 1/4 inch port and a 16 mm piston rod, but note that Ø40 is a non-ISO-6432 size.
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ40X450-75S |
|---|---|
| Series | MICJ mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 450 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | 1/4" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| MICJ | round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 40 | Bore size in mm. |
| ×450 | Stroke length in mm. |
| -75 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Pushes heavy palletized cartons at high speed onto a secondary line, using the 75 mm extend adjustment to dial in the exact push distance without moving the bracket.
Lifts and lowers a 30 kg tooling head, relying on the dual adjustable air cushions to prevent end-of-stroke impact damage during rapid 450 mm cycles.
Acts as a robust pneumatic stop for incoming pallets, absorbing the kinetic energy through the needle cushions while the external screw fine-tunes the stopping plane.
This model is ideal when you need both heavy thrust and the ability to trim the extend position without swapping hardware.
The adjustable stop screw sets the forward end position, but it is not a mid-stroke lock. The cylinder will drift and drop its load on air loss, so add an external rod lock or pilot check valve if you need to hold a suspended weight. Mount using LB foot, FA flange, or TC trunnion brackets, as the SDB pivot block is not offered on this adjustable variant.
AirtacDistr lists every MICJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-micj40-adjustable-double-rod-cushioned-mini-cylinder
Quick checklist
This 40 mm bore cylinder uses a 1/4 inch air port. At 0.7 MPa, push increases to 879.6 N and pull to 738.9 N. The theoretical maximum force is 128.1 kgf at 1.0 MPa.
An external screw shortens the extend stroke by up to 75 mm, giving a usable forward range of 375 to 450 mm. The needle-adjustable air cushions at both ends decelerate the piston near stroke ends to absorb shock. The cylinder cannot hold a load on air loss and will drift; use an external rod lock for suspended loads. The -S suffix means it has a magnet for CMSG, DMSG, or EMSG sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.