
The AirTAC MICJ Adjustable Mini Cylinder MICJ40X50-20S is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø40mm bore and 50mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
Dial in the forward stop on-site without swapping cylinders: the MICJ40X50-20S uses an external screw to shorten the extend end position by up to 20 mm, giving a usable forward range of 30-50 mm. Retract remains full stroke. A needle-set variable air cushion at both ends soaks up high-speed shock to protect your tooling.
This round-body stainless mini cylinder features a 1/4" port, a 16 mm piston rod with an M12x1.25 male thread, and a built-in magnet for CMSG/DMSG/EMSG sensors. The stainless barrel and rod resist mild corrosion and washdown environments.
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ40X50-20S |
|---|---|
| Series | MICJ mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 50 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | 1/4" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| MICJ | round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 40 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -20 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Drives a 30 kg stamping head at high speed, using the 20 mm extend adjustment to set the exact crush depth while the dual air cushions absorb the end-of-stroke impact.
Pushes loaded pallets weighing up to 32 kg, relying on the adjustable forward stop to tune the deflection angle precisely without moving the mounting hardware.
Applies 377 N of safe clamping force to close heavy cartons, using the needle cushion to prevent bounce when cycling at 800 mm/s.
Choose this Ø40 model when you need high force combined with fast, settable end-positioning. The external stop screw sets the extend endpoint, while the air cushion only decelerates near the stroke end—it is not a mid-stroke lock. If the machine loses air, the piston drifts, so add an external rod lock or pilot check valve for held loads.
Mount using LB foot, FA flange, or TC trunnion brackets (SDB pivot-block is not available on this adjustable variant). Because this SKU includes the -S magnet, you can directly mount CMSG, DMSG, or EMSG reed or electronic switches for position sensing.
AirtacDistr lists every MICJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-micj40-adjustable-double-rod-cushioned-mini-cylinder
Quick checklist
The theoretical maximum force is 128.1 kgf at 1.0 MPa.
An external screw shortens the extend stroke by up to 20 mm on-site, while needle valves adjust the air cushion at both ends to decelerate high-speed moves. The -S suffix means it has a built-in magnet for CMSG/DMSG/EMSG sensors. It does not hold position on air loss; use an external rod lock for that.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.