
The AirTAC MICJ Adjustable Mini Cylinder MICJ40X500-10S is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø40mm bore and 500mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
Shave up to 10 mm off the forward end position on site with the external stop screw on this AirTAC round-body mini cylinder. The MICJ40X500-10S pairs that on-the-fly extend adjustment with a variable air cushion at both ends, letting you dial in the exact forward stop while taming high-speed impact shock. Built with a stainless-steel barrel and Ø16 rod, it delivers mild washdown resistance for demanding environments.
As the largest bore in the series, this double-acting Ø40 unit pushes with 628.3 N and pulls with 527.8 N at 0.5 MPa. It features a 1/4" port, an M12x1.25 male rod thread, and a built-in magnet (-S) for CMSG, DMSG or EMSG sensors. Note that Ø40 is a non-ISO-6432 size, and the cylinder does not hold position on air loss—the piston drifts, so add an external rod lock for suspended loads.
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ40X500-10S |
|---|---|
| Series | MICJ mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 500 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | 1/4" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| MICJ | round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 40 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Use the 500 mm stroke to push a part into a measurement fixture, trimming the final 10 mm via the stop screw to hit the exact gauge contact point without reprogramming the machine.
Lower a 30 kg component into a press, using the extend stop to set a precise resting height and the -S magnet to confirm the bottomed position for the controller.
Sizing this model means balancing your thrust and space limits. The 10 mm extend stop and adjustable cushion shine in fast set-position moves where you must hit a precise forward spot without swapping hardware.
Mounting options include LB foot, FA flange and TC trunnion (the SDB pivot-block is not available on this adjustable variant), with back covers CA, U, R or CM. Because this SKU includes the -S magnet, you can mount CMSG, DMSG or EMSG sensors directly. Remember the stop screw only trims the extend stroke and the cushion only decelerates near the end—neither acts as a mid-stroke lock.
AirtacDistr lists every MICJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-micj40-adjustable-double-rod-cushioned-mini-cylinder
Quick checklist
This double-acting Ø40 cylinder uses a 1/4" port and an M12x1.25 male rod thread.
An external screw shortens the extend stroke by up to 10 mm (usable range 490-500 mm), while a needle-set air cushion at both ends decelerates the piston near the ends to absorb high-speed shock. The cylinder does not hold position on air loss—the piston drifts—so you need an external rod lock or pilot check valve for suspended loads. The -S magnet allows CMSG, DMSG and EMSG sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.